Rechercher

ISO/TR 22100-1:2015 provides assistance to the designer/manufacturer of machinery and related components as to how the system of existing type-A, type-B and type-C machinery safety standards should be applied in order to design a machine to achieve a level of tolerable risk by adequate risk reduction. It explains the general principles of ISO 12100 and how this type-A standard should be used for…

Physical security mechanisms are employed by cryptographic modules where the protection of the modules sensitive security parameters is desired. ISO/IEC TS 30104:2015 addresses how security assurance can be stated for products where the risk of the security environment requires the support of such mechanisms. This Technical Specification addresses the following topics: - a survey of physical…

Physical security mechanisms are employed by cryptographic modules where the protection of the modules sensitive security parameters is desired. ISO/IEC TS 30104:2015 addresses how security assurance can be stated for products where the risk of the security environment requires the support of such mechanisms. This Technical Specification addresses the following topics: - a survey of physical…

IEC 61175-1:2015 provides rules for the composition of designations for the identification of signals and signal connections. This includes the designation of power supply. This part of IEC 61175 is applicable to all types of signals within an industrial system, installation and equipment and industrial products. It deals with the information aspect of signals and not with their physical…

ISO 2144:2015 describes the determination of the residue on ignition of pulps, papers, and boards. The International Standard is applicable to all types of pulp, paper, and board. The lower limit of the determination is about 0,2 %. NOTE The procedure (Clause 7) requires that at least 10 mg of residue is weighed. The limit stated above corresponds to a 5 g sample. If the sample size is…

ISO 11074:2015 defines a list of terms used in the preparation of the standards in the field of soil quality. The terms are classified under the following main headings: - general terms (terms relating to soil, soil materials, land, and sites); - description of soil (soil characteristics, soil water, properties of soils and substances, processes in soil, contamination, pollution, background…

IEC 62150-3:2015 It has been found that some optical transceivers and receptacles are susceptible to fibre optic cable induced stress when side forces are applied to the mated cable-connector assembly, resulting in variations in the transmitted optical power. The purpose of this part of IEC 62150 is to define physical stress tests to ensure that such optical connections (cable and receptacle) can…

IEC 62150-3:2015 It has been found that some optical transceivers and receptacles are susceptible to fibre optic cable induced stress when side forces are applied to the mated cable-connector assembly, resulting in variations in the transmitted optical power. The purpose of this part of IEC 62150 is to define physical stress tests to ensure that such optical connections (cable and receptacle) can…

IEC 61290-4-3:2015(E) applies to output power controlled optically amplified, elementary sub-systems. It applies to optical fibre amplifiers (OFA) using active fibres containing rare-earth dopants, presently commercially available, as indicated in IEC 61291-1, as well as alternative optical amplifiers that can be used for single channel output power controlled operation, such as semiconductor…

IEC 60335-2-34:2012+A1:2015(E) deals with the safety of sealed (hermetic and semi-hermetic type) motor-compressors, their protection and control systems, if any, which are intended for use in equipment for household and similar purposes and which conform with the standards applicable to such equipment. It applies to motor-compressors tested separately, under the most severe conditions that may be…