Mechanical joining — Destructive testing of joints — Specimen dimensions and test procedure for cros...
ISO 16237:2015 specifies the geometry of the test specimens and the method for the cross-tension testing of single mechanical joints on single-lap test specimens up to a single sheet thickness of 4,5 mm.
The term "sheet", as used in this International Standard, includes extrusions and cast materials.
The purpose of the cross-tension test is to determine the mechanical characteristics…
Medical electrical equipment - Part 2-54: Particular requirementsfor the basic safety and essential ...
IEC 60601-2-54:2009+A1:2015 applies to the basic safety and essential performance of medical electrical equipment and medical electrical systems intended to be used for projection radiography and radioscopy. The minimum safety requirements specified in this particular standard are considered to provide for a practical degree of safety in the operation of ME equipment for radiography and…
Health informatics — Medical waveform format — Part 1: Encoding rules
ISO 22077-1:2015 specifies how medical waveforms, such as electrocardiogram, electroencephalogram, spirometry waveform, etc., are described for interoperability among healthcare information systems.
This International Standard may be used with other relevant protocols, such as HL7, DICOM, ISO/IEEE 11073, and database management systems for each purpose.
This is a general specification, so…
Surface active agents — Determination of polyethylene glycol content in nonionic ethoxylated surfact...
ISO 16560:2015 specifies a method for the determination of the polyethylene glycol (PEG) content in aromatic and aliphatic non-ionic surface active agents of the type R-(O-C2H4) n OH; where n is the mean ethylene oxide (EO) value. It is applicable to all ethoxylated products soluble in methanol or methanol/water mixture. This method applies to PEG concentrations as mass fraction greater than or…
Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and te...
IEC 61837-3:2015 deals with standard outlines and terminal lead connections as they apply to SMDs for frequency control and selection in metal enclosures and is based on IEC 61240 which standardized layout rules of outline drawings of the surface-mounted devices. This edition includes the following significant technical changes with respect to the previous edition:
- The outline drawing is…
Ophthalmic instruments — Optical coherence tomograph for the posterior segment of the human eye
ISO 16971:2015 is applicable to optical coherence tomography (OCT) instruments, systems, and methods that are intended to image and measure the biological tissue of the posterior segment of the human eye.
ISO 16971:2015 defines certain terms that are specific to this diagnostic procedure.
ISO 16971:2015 specifies minimum requirements for OCT instruments and systems. It specifies tests and…
Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of ...
IEC 60287-2-1:2015 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.
IEC 60287-2-1:2015 is solely applicable to the conditions of steady-state operation of cables at all alternating…
Measurement of fluid flow in closed conduits — Guidance to the selection, installation and use of Co...
ISO 10790:2015 gives guidelines for the selection, installation, calibration, performance, and operation of Coriolis flowmeters for the measurement of mass flow and density. This International Standard also gives appropriate considerations regarding the type of fluids measured, as well as guidance in the determination of volume flow and other related fluid parameters.
NOTE Fluids defined…
Energy management systems — Guidance for the implementation, maintenance and improvement of an energ...
1 Scope
This International Standard provides practical guidance and examples for establishing, implementing,
maintaining and improving an energy management system (EnMS) in accordance with the systematic
approach of ISO 50001. The guidance in this International Standard is applicable to any organization,
regardless of its size, type, location or level of maturity.
This International Standard…
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and si...
CISPR 15:2013+A1:2015 applies to the emission (radiated and conducted) of radiofrequency disturbances from:
- all lighting equipment with a primary function of generating and/or distributing light intended for illumination purposes, and intended either for connection to the low voltage electricity supply or for battery operation;
- the lighting part of multi-function equipment where one of the…
