Lasers et équipements associés aux lasers — Composants optiques standards — Partie 1: Composants pou...
L'ISO 11151-1 2015 spécifie les exigences pour les composants pour laser utilisés dans les plages spectrales proche de l'UV, visible et proche de l'infrarouge, pour les longueurs d'onde entre 170 nm et 2 100 nm, et vise à faciliter la fourniture de pièces détachées
en spécifiant des classes de dimensions et de tolérances préférentielles, d'où une réduction de la variété…
Lasers et équipements associés aux lasers — Composants optiques standards — Partie 2: Composants pou...
L'ISO 11151-2:2015 spécifie les exigences pour les composants pour laser utilisés dans la plage spectrale infrarouge, pour les longueurs d'onde entre 2,1 µm et 15,0 µm, et vise à faciliter la fourniture de pièces détachées
en spécifiant des classes de dimensions et de tolérances préférentielles, d'où une réduction de la variété des types,
en normalisant les spécifications et en…
Information technology — Metamodel framework for interoperability (MFI) — Part 1: Framework
ISO/IEC19763-1:2015 (Metamodel framework for interoperability) (MFI) family of standards. As the first part of MFI, this part provides an overview of the whole of MFI. In particular, the purpose, the underlying concepts, the overall architecture and the requirements for the development of other standards within the MFI family are described.
MFI provides a set of normative metamodels to enable the…
Information technology - Metamodel framework for interoperability (MFI) - Part 1: Framework
ISO/IEC19763-1:2015 (Metamodel framework for interoperability) (MFI) family of standards. As the first part of MFI, this part provides an overview of the whole of MFI. In particular, the purpose, the underlying concepts, the overall architecture and the requirements for the development of other standards within the MFI family are described.
MFI provides a set of normative metamodels to enable the…
Aerospace — Omega clamps (saddle clamps) for fluid systems — Dimensions
ISO 8177:2015 specifies maximum and minimum dimensions for omega clamps (saddle clamps) installed by means of two bolts with nominal diameters of 5 mm.
The specified dimensions define a dimensional envelope. This International Standard shall not be considered as an inter-changeability standard. The tolerances for each type of clamp are to be defined in the parts standards drawings.
Paper, board and pulps — Determination of residue (ash) on ignition at 525 degrees C
ISO/TS 1762:2015 describes the determination of the residue (ash) on ignition of paper, board and pulp at 525 °C. It is applicable to all types of paper, board, and pulp samples. The ash may consist of
a) mineral matter in the pulp and various residues from chemicals used in its manufacture,
b) metallic matter from piping and machinery, and
c) fillers, pigments, coatings, or residues…
ISO 19147:2015 specifies the data types and code lists associated with those types for the implementation of transfer nodes and their services in transport modelling and location based services.
It includes the following:
? defines transfer nodes in a multimodal way so that the definition is general and valid for all types of transport means and modes;
? links transfer nodes to a location…
Information technology — UPnP Device Architecture — Part 7-11: Lighting Device Control Protocol — Sw...
This service definition is compliant with the UPnP Device Architecture version 1.0 and Version 1.01 of the UPnP Standard Service Template.
This service-type enables the following functions:
· basic power switching for embedding devices.
This service template does not address:
· It is assumed that implementations of this service will not disable themselves as a side effect of…
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits ...
CISPR 11:2015 applies to industrial, scientific and medical electrical equipment operating in the frequency range 0 Hz to 400 GHz and to domestic and similar appliances designed to generate and/or use locally radio-frequency energy. This standard covers emission requirements related to radio-frequency (RF) disturbances in the frequency range of 9 kHz to 400 GHz. Measurements need only be…
Information technology - UPnP Device Architecture - Part 7-11: Lighting Device Control Protocol - Sw...
This service definition is compliant with the UPnP Device Architecture version 1.0 and Version 1.01 of the UPnP Standard Service Template.
This service-type enables the following functions:
· basic power switching for embedding devices.
This service template does not address:
· It is assumed that implementations of this service will not disable themselves as a side effect of…
