This International Standard provides guidance to all types of organizations, regardless of their size or location,
on:
a) concepts, terms and definitions related to social responsibility;
b) the background, trends and characteristics of social responsibility;
c) principles and practices relating to social responsibility;
d) the core subjects and issues of social responsibility;
e) integrating,…
Nonincendive electrical equipment for use in Class I and II, Division 2 and Class III, Divisions 1 a...
1.1 Purpose
The purpose of this Standard is to provide minimum requirements for the design, construction, and
marking of electrical equipment or parts of such equipment for use in Class I and Class II, Division 2 and
Class III, Divisions 1 and 2 hazardous (classified) locations.
This equipment, in normal operation, is not capable of causing ignition of the surrounding atmosphere
under the…
Geographic information — Calibration and validation of remote sensing imagery sensors and data — Par...
ISO/TS 19159-2:2016 defines the data capture method, the relationships between the coordinate reference systems and their parameters, as well as the calibration of airborne lidar (light detection and ranging) sensors.
ISO/TS 19159-2:2016 also standardizes the service metadata for the data capture method, the relationships between the coordinate reference systems and their parameters and the…
Electrostatics - Part 4-9: Standard test methods for specific applications - Garments
IEC 61340-4-9:2016 provides test methods for evaluating the electrical resistance of garments that contain surface conductive or dissipative components or materials used in the electronics industry for the control of electrostatic discharge. This standard defines procedures for measuring electrical resistance, including a system resistance test for garments that provide a ground path for…
Mineral insulated metal-sheathed thermocouple cables and thermocouples
IEC 61515:2016 establishes the requirements for simplex, duplex and triplex mineral-insulated metal-sheathed thermocouple cables and thermocouples, which are intended for use in general industrial applications. The abbreviation MIMS (for "mineral-insulated metal-sheathed") will be used hereafter. It covers thermocouple cables and thermocouples with only base-metal conductors of Types T…
Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives...
IEC 60335-2-97:2016 deals with the safety of electric drives for shutters, blinds and awnings, intended for household and similar purposes, their rated voltage being not more than 250 V for single-phase drives and 480 V for other drives. Battery-operated drives and other d.c. supplied drives are within the scope of this standard. Examples of equipment that can be driven are:
- spring controlled…
Information technology — IT asset management — Part 3: Entitlement schema
ISO/IEC 19770-3:2016 establishes a set of terms and definitions which may be used when discussing software entitlements (an important part of software licenses). It also provides specifications for a transport format which enables the digital encapsulation of software entitlements, including associated metrics and their management.
This common set of terms and associated transport format is…
Information technology - IT asset management - Part 3: Entitlement schema
ISO/IEC 19770-3:2016 establishes a set of terms and definitions which may be used when discussing software entitlements (an important part of software licenses). It also provides specifications for a transport format which enables the digital encapsulation of software entitlements, including associated metrics and their management.
This common set of terms and associated transport format is…
Semiconductor devices - Part 6: Discrete devices - Thyristors
IEC 60747-6:2016 provides standards for the following types of discrete semiconductor devices:
- reverse-blocking triode thyristors;
- reverse-conducting (triode) thyristors;
- bidirectional triodethyristors (triacs);
- turn-off thyristors.
This edition includes the following significant technical changes with respect to the previous edition:
a) Clauses 3, 4, 5, 6, and 7 were amended with…
Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones
ISO 3040:2016 specifies graphical indication applicable to a cone (right-angle circular cones) to define its dimensioning or to specify its tolerancing.
For the purposes of this International Standard, the term "cone" relates to right-angle circular cones only (any intersection by a plane perpendicular to the axis of the nominal cone is a circle).
NOTE 1 For simplicity, only…
