STANDARD FOR THE RATING AND FIRE TESTING OF FIRE EXTINGUISHERS
1 Scope
1.1 These requirements cover rating, and performance during fire tests, of fire extinguishers intended for
use in attacking Class A, B, C, D, and K fires as defined herein. These requirements also cover
performance during fire tests of fire extinguishing agents for application on Class D fires. The ultimate
rating of an extinguisher or the prescribed use of an extinguisher or fire…
Classification et essais sur foyers types des extincteurs
1 Domaine d'application
"Cette norme vise la classification et l’efficacité au cours des essais sur foyers -types des
extincteurs destinés à être utilisés pour combattre les feux de classes A, B, C, D et K définis cidessous.
Elle vise également l’efficacité au cours des essais sur foyers-types des agents
extincteurs destinés à être utilisés pour combattre les feux de classe D. La…
STANDARD FOR SIGNAL RECEIVING CENTRES CONFIGURATIONS AND OPERATIONS
1 SCOPE
1.1 This Standard covers requirements applicable to signal receiving centre facilities, protection service,
service centres, satellite centres, remote data entry centres, hosted signal receiving centres, managed
video signal receiving centres and bridging centres.
1.2 This standard covers the requirements for alarm-guard response service.
1.3 This Standard does not include…
Fibrocement drain, waste, and vent pipe and pipe fittings
1 Scope
1.1
This Standard covers fibrocement Type 1 (Class 3000) and Type 2 (Class 4000) pipe and pipe fittings for installation in gravity-flow systems inside and outside of buildings, above and below grade.
1.2
This Standard includes specifications for material, dimensions, crushing strength, chemical resistance, and joint tightness. Methods of marking to indicate compliance with these…
Guideline on basement flood protection and risk reduction
1.1 General
This Guideline covers measures to reduce the risks of basement flooding, and to mitigate the adverse effects on property, public safety, and public health in case of a flood event. It covers existing, new, rebuilt, and renovated houses in rural and urban settings.
1.2 Buildings covered
This Guideline covers all types of ground-related houses, with or without basements, that…
1.1 General
This Standard specifies requirements for the maintenance of electrical equipment and systems.
This Standard applies to new and existing electrical equipment. For new installations of electrical equipment, this Standard can be applied during the early design stages to allow for the implementation of proactive electrical maintenance practices and maintenance safety.
1.2 Purpose…
Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 4: Turbomolecular ...
This document, in conjunction with ISO 21360-1, specifies methods for the measurement of performance characteristics of turbomolecular vacuum pumps. It is applicable to all sizes and all types of turbomolecular vacuum pumps, including those
— with mechanical or magnetic bearings;
— with or without an additional drag stage(s) or other pumping stages on the shaft;
— with…
Packaging — Child-resistant packaging — Requirements and testing procedures for non-reclosable pack...
This document specifies performance requirements and methods of test for non-reclosable packaging that has been designated child-resistant and which is intended to contain non-pharmaceutical products. This document is intended for type approval only (see 2.5) and is not intended for quality assurance purposes.
This document applies to non-reclosable packages of the single-use type consisting of…
Plain bearings — Ring type thrust washers made from strip — Dimensions and tolerances
This document specifies a range of ring type thrust washers for general purpose use with wrapped bushes as specified in ISO 3547 (all parts).
It applies to thrust washers having inside diameters from 6 to 80 mm.
NOTE It is not expected that all the sizes listed will be available from stock but the standardization of sizes is aimed at making economies in tooling costs.
Welding — Grouping systems for materials — American materials
This document provides an American grouping system for materials for welding purposes, classified in accordance with the grouping system of ISO/TR 15608. A number of Canadian, Australian and New Zealand materials commonly used in North America are also included.
It can also apply for other purposes, such as heat treatment, forming, and non-destructive testing. Types of steels are listed in…