Rechercher

This document establishes procedures and guidelines for the measurement and classification of mechanical vibration of reciprocating compressor systems. The vibration values are defined primarily to classify the vibration of the compressor system and to avoid fatigue problems with parts in the reciprocating compressor system, i.e. foundation, compressor, dampers, piping and auxiliary equipment…

This document focus on the access to automotive repair and maintenance information for — heavy duty motor vehicles as defined in regulation (EC) 595/2009 Article 2; — engines and after-treatment systems (family) if they are type-approved as a separate technical unit, e.g. according to Directive 2007/46/EC. This document includes a transposition of the standards ISO 18541-1:2014…

1 Scope 1.1 These requirements cover rating, and performance during fire tests, of fire extinguishers intended for use in attacking Class A, B, C, D, and K fires as defined herein. These requirements also cover performance during fire tests of fire extinguishing agents for application on Class D fires. The ultimate rating of an extinguisher or the prescribed use of an extinguisher or fire…

1 Domaine d'application "Cette norme vise la classification et l’efficacité au cours des essais sur foyers -types des extincteurs destinés à être utilisés pour combattre les feux de classes A, B, C, D et K définis cidessous. Elle vise également l’efficacité au cours des essais sur foyers-types des agents extincteurs destinés à être utilisés pour combattre les feux de classe D. La…

1 SCOPE 1.1 This Standard covers requirements applicable to signal receiving centre facilities, protection service, service centres, satellite centres, remote data entry centres, hosted signal receiving centres, managed video signal receiving centres and bridging centres. 1.2 This standard covers the requirements for alarm-guard response service. 1.3 This Standard does not include…

1 Scope 1.1 This Standard covers fibrocement Type 1 (Class 3000) and Type 2 (Class 4000) pipe and pipe fittings for installation in gravity-flow systems inside and outside of buildings, above and below grade. 1.2 This Standard includes specifications for material, dimensions, crushing strength, chemical resistance, and joint tightness. Methods of marking to indicate compliance with these…

1.1 General This Standard specifies requirements for the maintenance of electrical equipment and systems. This Standard applies to new and existing electrical equipment. For new installations of electrical equipment, this Standard can be applied during the early design stages to allow for the implementation of proactive electrical maintenance practices and maintenance safety. 1.2 Purpose…

1.1 General This Guideline covers measures to reduce the risks of basement flooding, and to mitigate the adverse effects on property, public safety, and public health in case of a flood event. It covers existing, new, rebuilt, and renovated houses in rural and urban settings. 1.2 Buildings covered This Guideline covers all types of ground-related houses, with or without basements, that…

This document, in conjunction with ISO 21360-1, specifies methods for the measurement of performance characteristics of turbomolecular vacuum pumps. It is applicable to all sizes and all types of turbomolecular vacuum pumps, including those — with mechanical or magnetic bearings; — with or without an additional drag stage(s) or other pumping stages on the shaft; — with…

This document specifies performance requirements and methods of test for non-reclosable packaging that has been designated child-resistant and which is intended to contain non-pharmaceutical products. This document is intended for type approval only (see 2.5) and is not intended for quality assurance purposes. This document applies to non-reclosable packages of the single-use type consisting of…