Electrical safety requirements for cranes and hoists
1 Scope
1.1
This Standard applies to all types of electric cranes, including electric overhead travelling cranes, and hoists for vertical lifting and lowering of freely suspended load for voltages of 750 V and less between conductors. The equipment specified in this Standard is intended for installation in accordance with CSA C22.1, Canadian Electrical Code, Part I.
Note: Examples of electric…
Replace this clause of the RD with the following:
1.1.1 Equipment covered by this Standard
This Standard applies to UNINTERRUPTIBLE POWER SYSTEMS (UPS). The primary function of the UPS for this
Standard is to ensure continuity of an alternating power source. The UNINTERRUPTIBLE POWER SYSTEM may also
serve to improve the quality of the power source by keeping it within specified…
1 Scope
1.1 These requirements cover electrically operated single and multiple station smoke alarms intended for
open area protection in indoor locations and portable smoke alarms used as "travel" alarms in accordance
with:
a) Installation of Smoke Alarms, CAN/ULC-S553;
b) National Building Code of Canada; and
c) National Fire Code of Canada.
1.2 A single station smoke alarm (e.…
1 Domaine d’application
1.1 Les présentes exigences se rapportent aux avertisseurs de fumée électriques dans une
configuration à poste simple ou à postes multiples destinés à assurer la protection des aires ouvertes
dans les emplacements intérieurs, et aux avertisseurs de fumée portatifs utilisés comme avertisseurs « de
voyage », conformément aux publications suivantes :
a) Installation des…
1 Scope
1.1 This Standard applies to direct plug-in nightlights not exceeding 10 W input, for indoor use only, in
non-hazardous locations and intended to be used in accordance with the Canadian Electrical Code, Part
I, CSA C22.1, and the National Electrical Code, ANSI/NFPA 70. Light source types include incandescent
candelabra base lamps, non-replaceable lamps, [fluorescent, neon, or light-…
This document establishes a vocabulary of terms, with their definitions, applied in the field of rolling bearings and their technology under ISO Technical Committee TC 4 management.
It includes terms related to all types of rolling bearings wherein the principal degree of freedom is continuous rotation about an axis enabled by an ordered set of rolling elements between two circular raceways such…
This document specifies methods for the determination of the water content of plastics in the form of powder, granules, and finished articles. These methods do not test for water absorption (kinetics and equilibrium) of plastics as measured by ISO 62.
Method A is suitable for the determination of water content as low as 0,1 % with an accuracy of 0,1 %. Method B and Method C are suitable for the…
Mechanical joining — Guidelines for fatigue testing of joints
This document gives recommendations for test specimens and procedures for performing constant load amplitude fatigue tests on single- and multi-joint sheet specimens in the thickness range from 0,5 mm to 6 mm at room temperature and a relative humidity of max. 80 %.
NOTE The thickness range for advanced high strength steels (AHSS) and ultra high strength steels (UHSS) is generally below 3,0…
Sustainable cities and communities — Transforming our cities — Guidance for practical local implemen...
This document provides guidance on how to implement and maintain a management system for sustainable development based on ISO 37101 principles, specifically in the context of cities, but applicable to other forms of settlement. This document:
— provides guidance for practical implementation of a management system for sustainable development in cities and other settlements, based on ISO…
Primary batteries - Part 4: Safety of lithium batteries
IEC 60086-4:2019 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.
IEC 60086-4:2019 specifies tests and requirements for primary lithium batteries to ensure their safe operation under…
