Rechercher

IEC 60317-55:2013+A1:2019 specifies the requirements of solderable enamelled round copper winding wire of class 180 with a dual coating. The underlying coating is based on polyurethane resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The superimposed coating is based on polyamide resin. NOTE - A modified…

1.1 These requirements cover the performance during fire tests of pre-engineered fire extinguishing system units intended for the protection of commercial cooking equipment for restaurants, cafeterias and other similar venues. For installation requirements, see the following documents: NFPA 17, Standard for Dry Chemical Extinguishing Systems; NFPA 96, Standard for Ventilation Control and Fire…

1.1 Les présentes exigences concernent le rendement des tests d’incendie des unités de système d’extinction d’incendie standardisées conçues dans le but de protéger l’équipement pour les industries culinaires des restaurants, cafétérias et autres endroits semblables. Pour les exigences d’installation, consulter les documents suivants : NFPA 17, Standard for Dry Chemical Extinguishing Systems;…

This document describes the methods for determining the activity in becquerel (Bq) of gamma‑ray emitting radionuclides in test samples by gamma-ray spectrometry. The measurements are carried out in a testing laboratory following proper sample preparation. The test samples can be solid, liquid or gaseous. Applications include: — routine surveillance of radioactivity released from nuclear…

1.1 Scope This Recommendation | International Standard specifies the system layer of the coding. It was developed principally to support the combination of the video and audio coding methods defined in Parts 2 and 3 of ISO/IEC 13818. The system layer supports six basic functions: 1) the synchronization of multiple compressed streams on decoding; 2) the interleaving of multiple compressed…

1 Scope 1.1 This Standard applies to wiring devices rated 60 A or less and intended for use in accordance with CSA C22.1, Canadian Electrical Code, Part I, as follows: a) Class 2 power supply outlets (USB) installed on i) faceplates of an outlet box; ii) a yoke similar to an outlet box mounted receptacle; or iii) mounted on a wall as a self-contained device; and b) combination…

1 Scope ISO/IEC 14776 (all parts) provides for many different types of SCSI devices (e.g., disks, tapes, media changers). This standard defines a device model that is applicable to all SCSI devices. Other command standards expand on the general SCSI device model in ways appropriate to specific types of SCSI devices. ISO/IEC 14776 (all parts) specifies the interfaces, functions, and operations…

1 Scope This document defines the Application Programming Interface (API) and Service Provider Interface (SPI) for standard interfaces within a biometric system that support the provision of that biometric system using components from multiple vendors. It provides interworking between such components through adherence to this and to other International Standards. For use in a system that does…

1 Scope This document supports the interest of system users in having consistent, complete, accurate, and usable information. It addresses both available approaches to standardization: a) process standards, which specify the way that information products are to be acquired and supplied; and b) information product standards, which specify the characteristics and functional requirements of the…

1 Scope 1.1 There is a commentary available for this Clause. This Standard covers the design, construction, operation, maintenance, deactivation, and abandonment of oil and gas industry pipeline systems that convey a) liquid hydrocarbons, including crude oil, multiphase fluids, condensate, liquid petroleum products, natural gas liquids, and liquefied petroleum gas; b) oilfield water; c)…