Aircraft — Tow bar attachment fittings interface requirements — Part 2: Regional aircraft
This document specifies the interface requirements for tow bar attachment fittings on the nose gear (when towing operations are performed from the nose gear) of conventional tricycle type landing gears of commercial civil transport aircraft.
Its purpose is to achieve tow bar attachment fittings interface standardization by aircraft mass category (which determines tow bar forces) in order to…
Electric dishwashers for commercial use - Test methods for measuring the performance
IEC 63136:2019 applies to manually loaded under-counter one-tank and one-tank hood-type electrically heated dishwashing machines for washing plates, dishes, glassware, cutlery and similar articles.
These machines are used in commercial kitchens, such as restaurants, canteens, hospitals and in businesses such as bakeries, butchers' shops, etc.
This document does not apply to commercial…
Soft soldering fluxes — Test methods — Part 16: Flux efficacy test, wetting balance method
This document specifies a method for the assessment of the efficacy of a soft soldering flux, known as the wetting balance method. It gives a qualitative assessment of the comparative efficacy of two fluxes (for example, a standard and a test flux), based on their capacity to promote wetting of a metal surface by liquid solder. The method is applicable to all flux types in liquid form classified…
Electrical installations in ships - Part 302-2: Low voltage switchgear and controlgear assemblies - ...
IEC 60092-302-2:2019 defines the specific requirements of low voltage marine power switchgear and controlgear assemblies (MPSC-assemblies) as follows:
- stationary assemblies with enclosure for which the rated voltage does not exceed 1 000 V AC or 1500 V DC;
- assemblies intended for use in conjunction with the power generation, distribution and conversion of electric energy, and for the…
Eyewear display - Part 20-20: Fundamental measurement methods - Image quality
IEC 63145-20-20:2019 (E) specifies the standard measurement conditions and measurement methods for determining the image quality of eyewear displays. This document is applicable to non-see-through type (virtual reality “VR” goggle) and see-through type (augmented reality “AR” glasses) eyewear displays using virtual image optics.
Contact-lens type displays and retina direct projection displays…
Wind energy generation systems - Part 21-3: Measurement and assessment of electrical characteristics...
IEC TR 61400-21-3:2019 provides guidance on principles which can be used as the basis for determining the application, structure and recommendations for the WT harmonic model. For the purpose of this Technical Report, a harmonic model means a model that represents harmonic emissions of different WT types interacting with the connected network.
This document is focused on providing technical…
Measurement procedures of magnetic field levels generated by electronic and electrical equipment in ...
IEC TS 62764-1:2019(E) applies to the assessment of human exposure to low frequency magnetic fields generated by automotive vehicles. For plug-in vehicles, this includes the electric vehicle supply equipment (EVSE) and associated cables provided by the car manufacturer.
The scope of this document establishes the measurement procedure for the evaluation of magnetic field levels in the automotive…
Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular ...
IEC 61076-3-123:2019. covers hybrid rectangular connectors with a 3 poles 16 A electric portion for power supply and a duplex fibre optic connector type LC portion for data transmission.
These connectors consist of fixed and free connectors, either rewirable or non-rewirable (for both portions) and use the rectangular push-pull housing described in IEC 61076-3-117 with IP65/IP67 degree of…
Implants for surgery — Active implantable medical devices — Part 2: Cardiac pacemakers
This document specifies requirements that are applicable to those active implantable medical devices intended to treat bradyarrhythmias and devices that provide therapies for cardiac resynchronization.
The tests that are specified in this document are type tests, and are to be carried out on samples of a device to show compliance.
This document was designed for bradyarrhythmia pulse generators…
1 Scope
1.1
This Standard applies to unvented portable type gas camp heaters of the catalytic and infrared type only up to and including a maximum input of 12,000 Btu/hr (3 517 w) using propane, butane, and liquefied petroleum gas mixtures thereof, and intended for outdoor use.
1.2
This Standard applies to portable type gas camp heaters having a:
a)
regulated pressure; or
b)
non-regulated…
