Rechercher

This standard applies to two types of diesel fuel, Type A and Type B. Both are suitable for use in high-speed diesel engine powered equipment for on-road and off-road applications and in select equipment powered by medium speed diesel engines. Type A is intended for use in selected applications such as urban buses and underground mining or when ambient temperatures require better low-…

1 Scope 1.1 This Standard applies to permanently connected, single or multi-branch circuit, multi-circuit output, solid-state lighting controls rated at 600 V and less, 50 or 60 Hz; single or three phase; with or without overcurrent protection on the load side; with or without integral load switching devices; designed to be used as a complete solid-state lighting control system for the purpose…

1 Scope This document provides specific requirements for process sealing between a flammable process fluid and an electrical system where a failure could allow the migration of the process fluid directly into the premises wiring system. NOTE Some definitions differentiate the terms “flammable” and “combustible” liquids on the basis of their flashpoints. Combustible liquids under conditions…

1 Scope 1.1 This Standard specifies requirements for the following types of control cables, rated 30 V maximum, intended for use in extra-low-voltage control circuits in accordance with CSA C22.1, Canadian Electrical Code, Part I: a) Type LVT extra-low-voltage control circuit cables, rated 60 °C maximum; b) Low-energy control cables, rated 105 °C maximum; c) Type ELC extra-low-voltage…

Le présent document spécifie, par référence aux parties correspondantes de l'ISO 230, plusieurs familles d'essais pour centres d'usinage à broche horizontale ou verticale ou à têtes universelles de différents types, destinés à être autonomes ou à être intégrés dans des systèmes de fabrication. Le présent document établit également les tolérances ou les valeurs maximales admissibles…

This document specifies, by reference to the relevant parts of ISO 230, several families of tests for machining centres with horizontal or vertical spindle or with universal heads of different types, standing alone, or integrated in flexible manufacturing systems. This document also establishes the tolerances or maximum acceptable values for the test results corresponding to general purpose and…

<!-- NEW! -->IEC 60092-350:2020 is available as <a href="https://webstore.iec.ch/publication/66486">IEC 60092-350:2020 RLV</a> which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.<br /> <br /> IEC 60092-350:2020 provides the general constructional requirements and…

IEC 60092-350:2020 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 60092-350:2020 provides the general constructional requirements and test methods for use in the manufacture of…

IEC 60092-350:2020 provides the general constructional requirements and test methods for use in the manufacture of electric power, control and instrumentation cables with copper conductors intended for fixed electrical systems at voltages up to and including 18/30(36) kV on board ships and offshore (mobile and fixed) units. The reference to fixed systems includes those that are subjected to…

This document specifies data elements and data frames for messages a) exchanged between roadside modules and: 1) signal controllers, 2) traffic management centres, and/or 3) other roadside modules. b) exchanged between traffic management centres and signal controllers. NOTE Roadside modules can generate data based on inputs from vehicle detectors and/or probe data transmitted by…