Rechercher

This National Standard of Canada is based on International Standard IEC/TR 61400-24:2002. 1 Scope During the last few years, all major wind turbine manufacturers have made dedicated efforts towards developing adequate lightning protection systems, and the first experiences with these new designs are beginning to be seen. It is therefore reasonable at this time to consider and prepare for a…

1. SCOPE 1.1 This Standard sets forth minimum requirements for steel, non-pressure tanks that are used for the aboveground storage of flammable and combustible liquids such as gasoline, fuel oil, or similar products with a relative density not greater than 1.0. NOTE: These tanks may also be used for the storage of used oil. For tanks intended solely for the collection of used oil, refer to ULC-…

Provides elements for product conformity assessment. Critical defects on tools, devices and equipment for live working are not acceptable. Major defects on tools, devices and equipment for live working are likely to result in failure or in a significant reduction of functionality, while minor defects do not reduce significantly the functionality. This standard defines assessment methods for…

ISO 2137:2007 specifies several methods for the empirical estimation of the consistency of lubricating greases and petrolatum by measuring the penetration of a standardized cone. Four procedures are specified for determining the consistency of lubricating greases by measuring the penetration of a full-scale cone for unworked, worked, prolonged worked and block penetrations for penetrations of up…

ISO 12127-2:2007 specifies a test method designed to evaluate the heat transfer and the behaviour of materials used for protective clothing when such materials are struck by high temperature metal particles, especially when these are trapped in the folds of the garment in working situations. The results obtained by this method permit the comparison of the behaviour of different materials which…

ISO/IEC 15944-4:2007 focuses on providing a definition of the concepts and the relationships that exist among those concepts in an Open-edi business transaction. Such a repository of conceptual definitions is termed a domain ontology for Open-edi. It addresses the fundamental and definable aspects of a business transaction as it unfolds with business partners: first planning their activities,…

ISO/IEC 15944-4:2007 focuses on providing a definition of the concepts and the relationships that exist among those concepts in an Open-edi business transaction. Such a repository of conceptual definitions is termed a domain ontology for Open-edi. It addresses the fundamental and definable aspects of a business transaction as it unfolds with business partners: first planning their activities,…

ISO 24497-1:2007 specifies terms and definitions for procedures in the sphere of non-destructive testing by the method of metal magnetic memory. The terms specified in ISO 24497-1:2007 are mandatory for application in all types of documentation and literature in the sphere of non-destructive testing, using the method of metal magnetic memory included in the scope of standardization works and/or…

Scope This Code covers all electrical work and electrical equipment operating or intended to operate at all voltages in electrical installations for buildings, structures, and premises, including factory-built relocatable and non-relocatable structures, and self-propelled marine vessels stationary for periods exceeding five months and connected to a shore supply of electricity continuously or…

1 Scope 1.1 General This Standard specifies requirements for the design, manufacture, construction, modification, operation, inspection, testing, and maintenance of passenger ropeways and passenger conveyors. Requirements for abnormal or unusual conditions are not specifically provided for, nor are all details of engineering and construction prescribed. It is intended that all work performed…