Rechercher

1 Scope 1.1 General This Standard contains requirements for the material, design, manufacture, marking, and testing of serially produced, refillable Type HGV 2 containers intended only for the storage of compressed hydrogen gas for on-road vehicle operation. These containers a) are to be permanently attached to the vehicle; b) have a capacity of up to 1000 L (35.4 ft3) water capacity; and…

1 Scope 1.1 General This Standard provides minimum requirements for the development and reporting of a natural asset inventory, which is the first step towards natural asset management. This Standard is designed to be sufficiently flexible that it can be applied in any jurisdictional context. It can also be used to include not only natural assets within a given jurisdictional boundary but also…

1 Scope 1.1 Inclusions This Standard applies to structures and hoists that are not a permanent part of buildings, structures, or other works, and that are used during construction, alteration, or demolition to raise and lower persons and/or materials connected with or related to a building project. This Standard covers the design, construction, installation, maintenance, operation, and…

IEC 60287-1-1:2023 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC 60287-1-1:2023 edition 3.0 and the previous IEC 60287-1-1:2006+ AMD1:2014 edition 2.1. Furthermore, comments from IEC TC 20 experts are provided to explain the reasons of the most relevant changes, or to clarify…

This document contains a list of terms which are frequently used in the standardization of protective clothing (5.1.4) and protective equipment worn on the body, including hand and arm protection and lifejackets, and definitions of these terms. The definitions are intended to support an unambiguous use of the terms listed. This document is intended to serve as a reference document for the Working…

IEC TR 63468:2023 overviews the fundamentals of artificial intelligence (AI) as it could potentially be applied within nuclear facilities and identifies proven or potential applications, with the objective to foster better understanding and adoption of AI technologies within such facilities. With the objective of supporting future standard development work of IEC SC 45A in this technical area,…

IEC 61820-3-4:2023 specifies protective provisions for the operation of lamp systems powered by series circuits in aeronautical ground lighting. The protective provisions described here refer only to secondary supply systems for loads that are electrically separated from the series circuit. This document specifies the level of SELV, and alternatively PELV, under consideration of additional…

1 Scope 1.1 General 1.1.1 Application This Standard applies to hyperbaric chambers that have as their primary function the subjection of humans to pressure environments exceeding 1 atmosphere absolute, such as those required in a) diving operations; b) work under compressed-air conditions; c) medical treatment; d) training; and e) research. 1.1.2 Minimum requirements This Standard…

This document is intended to be used alongside ISO/TR 12295, ISO 11226, the ISO 11228 series and ISO/TR 23476 in the construction sector. This document (although the examples shown refer only to the civil construction sector) gives information on how existing standards can be used in a global sector, such as construction. Where biomechanical overload is a relevant aspect, albeit with different…

IEC 62769-100:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 62769-100:2023 specifies an FDI®[1] profile of IEC 62769 for Generic Protocols. That means that all interfaces…