Rechercher

The scope of ISO/TR 26999:2012 is the use of the so-called process-oriented method (POM) in International Standards, Technical Specifications, Technical Reports and related documents. The Technical Report discusses the use of POM in the development of high-level system architectures for intelligent transport systems (ITS). It is based on the results of the work of the FRAME‑S project and the…

1 Scope This International Standard gives general requirements for laryngoscopes used for intubation, and specifies critical dimensions for the handle and lamp of hook-on type laryngoscopes. It also addresses the interchangeability of blades and handles. It is applicable only to instruments with an internal battery-operated power source for illuminating the larynx, since electrical safety…

IEC 61094-8:2012 applicable to working standard microphones meeting the requirements of IEC 61094-4. It describes methods of determining the free-field sensitivity by comparison with a laboratory standard microphone or working standard microphone (where applicable) that has been calibrated according to either; IEC 61094-3; IEC 61094-2; IEC 61094-5; IEC 61094-6; or this part of IEC 61094. Methods…

IEC/TS 62758:2012(E) presents a standard method to estimate the performance of a pulsed electro-acoustic (PEA) measurement system. For this purpose, a systematic procedure is recommended for the calibration of the measurement system. Using the procedure, users can estimate whether the system works properly or not.

ISO 17261:2012 describes the conceptual and logical architecture for automatic vehicle and equipment identification (AVI/AEI) and supporting services in an intermodal/multimodal environment. It presents a high level view of AEI intermodal and multimodal system architecture, and describes the key sub systems, their associated interfaces and interactions and how they fit into system wide functions…

The Open Test sequence eXchange (OTX) Core, defined in ISO 13209-2, describes the basic structure underlying every OTX document. ISO 13209-3:2012 extends the Core by a set of additional features, using the extension mechanism rules described in ISO 13209-2. The extensions defined in ISO 13209-3:2012 comprise features which allow diagnostic communication to a vehicle's diagnostic interface,…

Scope 1.1 This Standard specifies design, testing, and marking requirements for manufactured fall arresters and fixed vertical rigid rails that are used on a vertical or slope plane. "Vertical plane" means an angle of not more than 15° from the vertical, which prevents the worker from leaning back. 1.2 The equipment specified in this Standard is intended for use where there is a…

Scope 1.1 This Standard provides definitions, classifications, and a method for determining calculated daily energy consumption (CDEC) values and specifies minimum energy efficiency requirements for refrigerated display cabinets. 1.2 This Standard applies to the refrigerated display cabinets (with or without an integral refrigerated storage cabinet) that are described in Clause 4 and intended…

1 Scope 1.1 This Standard specifies the technical requirements for the design, procurement, fabrication, installation, modification, repair, replacement, testing, examination, and inspection of, and other work related to, pressure-retaining systems, components, and supports over the service life of a CANDU nuclear power plant. 1.2 This Standard applies to all pressure-retaining systems,…

1 Scope This part of IEC 61000 relates to the immunity requirements and test methods for electrical and electronic equipment subjected to static electricity discharges, from operators directly, and from personnel to adjacent objects. It additionally defines ranges of test levels which relate to different environmental and installation conditions and establishes test procedures. The object of this…