Rechercher

1 Scope and object 1.1 Scope of this Standard This Standard specifies requirements pertaining to the following: a) definitions; b) construction; c) equipment complying with Standards; d) safety and protection; e) materials and quality of work; f) marking; and g) tests (of a general nature). Such requirements are applicable to all individual Standards of the Canadian Electrical…

1 Scope 1.1 This Standard applies to portable luminaires, intended for use in dry, damp, and wet locations, and intended to be used in accordance with the Rules of CSA C22.1, Canadian Electrical Code, Part I, in non- hazardous locations, on a nominal 120 V system and 15 or 20 A branch circuits, or on the load side of a Class 2, LED Class 2, or safety extra-low voltage (SELV) circuit. 1.2 This…

This document gives the safety requirements and measures for stationary and displaceable combined woodworking machines, having at least two separately usable working units and with manual loading and unloading of the workpiece, hereinafter referred to as "machines". The integrated working units can be of these types only: — a sawing unit; — a moulding unit; — a planing unit…

1.1 This Standard has been developed for the assessment of volatile organic compound emissions from polyurethane foam materials used in residential and nonresidential occupancies. It outlines a test procedure for the determination of volatile organic compounds from the specimen and explains why certain test conditions have been selected. 1.2 This laboratory test method is based on ASTM D5116…

Accidental actions can be subdivided into accidental actions with a natural cause and accidental actions due to human activities. This document applies to reliability based and risk informed decision making for the design and assessment of structures subject to accidental actions due to human activities. However, fires and human-made earthquakes are not included. The information presented in this…

1 Scope 1.1 Scope This Standard specifies requirements for controlling hazardous energy associated with potentially harmful machines, equipment, and processes (including mobile machinery and equipment; see Annex M). Where a CSA Standard or other recognized Standard exists for a specific type of machinery, equipment, or process, it should be used with this Standard to provide the most effective…

1 Scope 1.1 This Standard sets forth characteristics of effective and durable installation methods, in both new and existing buildings, of fenestration products within the scope of AAMA/WDMA/CSA 101/I.S.2/A440 that are intended for installation in buildings of all occupancies to which NBC Parts 3, 4, 5, and 6 of Division B apply. 1.2 In addition to fenestration products within the scope of…

IEC 60335-2-107:2017+A1:2020 specifies safety requirements and their verification for the design and construction of robotic battery powered electrical rotary lawnmowers and their peripherals with the rated voltage of the battery being not more than 75 V d.c. EMC and environmental aspects, except noise, have not been considered in this standard. This document does not apply to the additional…

1 Scope 1.1 This Standard covers molecularly oriented polyvinylchloride (PVCO) pipe intended for use in pressure applications such as water mains, sewer force mains, and process piping. Note: This Standard does not address chemical compatibility between PVCO pipe and process fluids. Where PVCO pipe is to be used in non-water applications, the manufacturer should be consulted. 1.2 PVCO…

1 Scope 1.1 This Standard covers rigid polyvinylchloride (PVC) pipe and fittings intended for use in pressure applications such as water mains, water service piping, and process piping. The fittings covered by this Standard include moulded, solvent-cemented, gasketed, or threaded fittings, and fittings that have been fabricated for use with any joining method. Notes: 1) Where PVC pipe and…