Rechercher

This document gives the safety requirements and measures for stationary manually loaded and unloaded: —    cold presses; —    hot presses; —    bending presses; —    edge/face gluing presses; —    membrane presses; —    embossing presses; where the pressing force is applied by hydraulic actuators pushing two flat or shaped surfaces against each other, hereinafter referred to as "machines…

This document specifies a method for the evaluation of the buckling load which: a) takes into account a geometric model of the hydraulic cylinder, meaning it does not treat the hydraulic cylinder as an equivalent column, b) can be used for all types of cylinder mounting and rod end connection specified in Table 2, c) includes a factor of safety, k, to be set by the person performing the…

IEC 60204-1:2016+A1:2021 applies to electrical, electronic and programmable electronic equipment and systems to machines not portable by hand while working, including a group of machines working together in a co-ordinated manner. The equipment covered by this part of IEC 60204 commences at the point of connection of the supply to the electrical equipment of the machine. This sixth edition cancels…

1 Scope 1.1 Application This Standard provides requirements and guidelines for the thermal simulation and calculation of thermal bridges in new and existing Part 3 and Part 9 buildings, as defined in the National Building Code of Canada (NBC). This Standard describes the requirements for simulating heat flow through building enclosures, and can be used to justify the opaque envelope U-values…

This document applies to the basic safety and essential performance of respiratory high-flow therapy equipment, as defined in 201.3.220, hereafter also referred to as ME equipment or ME system, in combination with its accessories: —   intended for use with patients who can breathe spontaneously; and —   intended for patients who would benefit from improved alveolar gas exchange; and who would…

This document applies to the basic safety and essential performance of respiratory high-flow therapy equipment, as defined in 201.3.220, hereafter also referred to as ME equipment or ME system, in combination with its accessories: - intended for use with patients who can breathe spontaneously; and - intended for patients who would benefit from improved alveolar gas exchange; and who would…

This part of IEC 61482 is applicable to protective clothing used in work where there is the risk of exposure to an electric arc hazard. This document specifies requirements and test methods applicable to materials and garments for protective clothing for electrical workers against the thermal hazards of an electric arc. Electric shock hazard is not covered by this document, which is…

This document describes various use cases for the sharing of probe vehicle data as a common platform for smart city instantiation. When modernizing a city towards a smart city, it is necessary for information flows across various fields, such as transportation, healthcare, energy, water and other government services, to be effectively managed and shared. Despite efforts from many cities,…

This document addresses the system design of pipe and joints of above ground installations without end-thrust as specified in systems standard ISO 23856. It is directed to pipelines with a minimum stiffness of SN 5000 laid in a straight line between thrust blocks. It is based on the safety concepts described in ISO TS 20656-1, with consequence class 2 (CC2) as default. For other consequence…

IEC 62841-3-12:2017+A1:2021 applies to transportable threading machines. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in Annex K. This standard deals with the hazards presented by tools which are encountered…