Rechercher

ISO 20289:2018 provides a chemical method for technicians working with Total Reflection X-ray Fluorescence (TXRF) instrumentation to perform measurements of water samples, according to good practices, with a defined degree of accuracy and precision. Target users are identified among laboratories performing routine analysis of large numbers of samples, which also comply with ISO/IEC 17025. ISO…

This document defines requirements for collision warning systems (CWS) and collision avoidance systems (CAS) that address swing/rotation motion for: — earth moving machinery as defined in ISO 6165; — mobile underground mining machinery as defined in ISO 19296; and — road construction machinery as defined in ISO 22242. This document covers intended object between the ground plane of the machine…

The purpose of this Standard is to set out standard practices for interpreting forensic results. The committee is working on a series which, when complete, will include— Part 1: Terms and definitions Part 2: Recognition, recording, collection and storage of material Part 3: Analysis Part 4: Interpretation (this Standard) Part 5: Reporting Part 1 and 2 have been published

The purpose of this Standard is to set out standard practices for reporting forensic results. The committee is working on a series which, when complete, will include— Part 1: Terms and definitions Part 2: Recognition, recording, collection and storage of material Part 3: Analysis Part 4: Interpretation Part 5: Reporting (this standard) Part 1 and 2 are published.

The purpose of this Standard is to set out standard practices for analysis of material for forensic purposes. The committee is working on a series which, when complete, will include— Part 1: Terms and definitions Part 2: Recognition, recording, collection and storage of material Part 3: Analysis (this Standard) Part 4: Interpretation Part 5: Reporting Part 1 and 2 have been published

ISO 23551-10:2016 specifies the safety, design, construction and performance requirements and testing for automatic vent valves (hereafter referred to as "valves") for use with gas burners, gas appliances burning one or more gaseous fuels. It is applicable to valves with declared maximum inlet pressures up to and including 500 kPa (5 bar) of nominal connection sizes up to and including…

ISO 10896-2:2016 specifies general safety requirements for slewing rough-terrain variable-reach trucks (hereafter known as "trucks"), consisting of a lower chassis with a slewing upper structure equipped with a telescopic lifting means (pivoted boom), on which a load handling device (e.g., carriage and fork arms) is typically fitted. Fork arms and other integrated attachments are…

This document provides information regarding the measurement and evaluation of the mechanical vibration of wind turbines and their components. The working principles of wind turbines covered by this document are described in Annex B. The installation site and type of wind turbine mechanical drive train used influences the vibration magnitude, so for the purposes of this document wind turbines…

This document specifies the requirements for wire or textile reinforced hoses and hose assemblies suitable for dispensing hydrogen up to 70 MPa nominal working pressure, in the operating temperature range of −40 °C to 65 °C. This document contains safety requirements for material, design, manufacture and testing of gaseous hydrogen hose and hose assemblies for hydrogen fuelling stations. Hoses…

The proposal of this new work item is to develop the standard of "Quick-frozen coated aquatic products". The standard specifies the requirements for quick-frozen coated aquatic products and the test methods for quality control. It also specifies the requirements of packaging, marking, storage and transportation. The standard is applicable to quick-frozen aquatic products-breaded or in…