Rechercher

1 Scope This Standard specifies tests and requirements for the automatic valve, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in CSA B109.2 in Canada and NFPA 52 in the U.S. This Standard also provides general design principles and specifies requirements for instructions and marking. This Standard is not applicable to the following: a)…

IEC 60118-0:2022 gives recommendations for the measurement of the performance characteristics of air conduction hearing aids measured with an acoustic coupler or occluded ear simulator. This document is applicable to the measurement and evaluation of the electroacoustical characteristics of hearing aids, for example for type testing and manufacturer data sheets. This document is also applicable…

IEC SRD 62913-1:2022 (E) describes a common approach for IEC technical committees to define generic smart grid requirements for further standardization work. It uses as input the use case methodology defined as part of the IEC 62559 series, and provides a more detailed methodology for describing use cases and extracting requirements from these use cases. This will achieve a consistent and…

This document describes compatibility for ensembles of personal protective equipment (PPE) to be used by personnel where operating situations and processes require more than one piece of PPE. Where there is more than one risk to health and safety, it is necessary to wear or use more than one item of PPE at the same time. Such equipment should be compatible and continue to be effective to minimise…

This document defines procedures for determining the standard thermal outputs and other characteristics of radiators and convectors installed in a permanent manner in construction works, fed with water or steam at temperatures below 120 °C, supplied by a remote energy source. This document specifies the laboratory arrangements and testing methods to be adopted, the admissible tolerances, the…

IEC TS 61850-1-2:2020+AMD1:2022, which is a technical specification, is intended for any users but primarily for standardization bodies that are considering using IEC 61850 as a base standard within the scope of their work and are willing to extend it as allowed by the IEC 61850 standards. This document identifies the required steps and high-level requirements in achieving such extensions of IEC…

This document specifies a method based on a cyclic corrosion test for testing the corrosion protection of automobiles using coating systems on aluminium, steel or galvanized steel. The test method uses corrosive conditions (temperature and humidity ramps and salt spray) to create realistic corrosion patterns. These corrosion patterns are typical for automobiles, and they are comparable in the…

This document establishes the basic principles and methods for preparing and compiling terminologies both inside and outside the framework of standardization. It describes the links between objects, concepts, definitions and designations. It also establishes general principles for the formation of terms and proper names and the writing of definitions. This document is applicable to terminology…

1 Scope 1.1 General This Standard specifies requirements for the identification of hazards, and assessment and control of risks, across first responder occupations. This Standard can be applied to any type of risk and can be applied to both sleep-related and task-related fatigue. It is intended that this Standard be utilized to harmonize risk management processes in existing and future…

1 Scope This clause of Part 1 is replaced by the following: This International Standard deals with the safety of the following appliances, their RATED VOLTAGE being not more than 250 V for single-phase appliances, 480 V for other appliances and 24 V DC for appliances when battery operated: – REFRIGERATING APPLIANCES for household and similar use; – ICE-MAKERS incorporating a motor-…