Rechercher

1. Scope 1.1 This Standard covers full body harnesses intended for use as body supports in personal fall arrest systems and in other work situations that involve the risk of falling. 1.2 This Standard does not stipulate designs for full body harnesses, except insofar as design limitations are necessary to help ensure safe and durable service. 1.3 This Standard does not include…

This National Standard of Canada is equivalent to International Standard ISO 105-A02:1987. It describes the grey scale for determining changes in colour of textiles in colour fastness tests, and its use. A precise colorimetric specification of the scale is given as a permanent record against which newly prepared working standards and standards that may have changed can be compared.

This National Standard of Canada is equivalent to International Standard ISO 105-A03:1987. It describes the grey scale for determining staining of adjacent fabrics in colour fastness tests, and its use. A precise colorimetric specification of the scale is given as a permanent record against which newly prepared working standards and standards that may have changed can be compared.

1. Scope 1.1 This Standard specifies the basis upon which a laboratory can establish its readiness to perform analytical measurements and testing of waste samples submitted with respect to Ontario Regulation 309 under the Environmental Protection Act of Ontario. 1.2 This Standard specifies that a laboratory wishing to perform work under Ontario Regulation 309 shall document its…

This National Standard of Canada is equivalent to International Standard ISo 8831-1989. 1.1 Scope This International Standard is an application layer standard within the Open Systems Interconnection framework set up by ISO 7498. It defines the concepts and services for job transfer and manipulation. This International Standard requires that the user of JTm - specifies the open…

1. Scope 1.1 General This Standard covers procedures for the making, curing, and testing in compression of masonry prisms primarily during the preconstruction phase of masonry construction.

Preface This is the first edition of CSA Special Publication A443, Manual of Terms and Definitions Recommended for Use in CSA Masonry Standards. These definitions are specific to the Canadian masonry industry and are intended to promote uniformity of use in CSA Standards and the industry as a whole. It is recognized th at these definitions may not be the same as those used in current…

1. Scope 1.1 This Standard applies to single-phase electric tools of the bench type intended for use in nonhazardous locations in accordance with the Canadian Electrical Code, Part I, when connected to a nominal system voltage of 240 V or less. 1.2 Requirements for cord-connected, double-insulated bench tools are specified in Clause 7 of this Standard. 1.3 This Standard does not…

This National Standard of Canada is identical to American National Standard ANSI/BHMA A156.15-1981. 1.1 This Standard establishes requirements for door closers combined with hold-open devices or free-swinging door closers combined with releasing devices and includes performance tests covering operational, cyclical and finish criteria. 1.2 Tests described in this Standard are performed…