Rechercher

1. Scope 1.1 This Standard applies to rigid unplasticized poly (vinyl chloride) boxes and fittings of the following types that are intended to be installed and used with rigid PVC conduit at a maximum working temperature of 75°C in accordance with the rules of the Canadian Electrical Code, Part I: (a) junction boxes with an interior volume of 1640 mL× or less that are intended to provide…

1. Scope 1.1 This Standard covers qualification of shop manufacturers of laminated structural timber pressure-glued by the use of clamps or mechanical means other than nailing. It does not certify the laminated timbers so produced. 1.2 This Standard sets forth requirements for determining the initial and continuing suitability of a plant's personnel, equipment, and procedures to…

Covers cross-linked polyethylene pressure tubing systems in sizes NPS 1/4 through 2. Components are made in one standard dimension ratio (SDR 9) and are intended for use in potable water distribution systems at a maximum working temperature of 82 degrees C and 0.69 MPa (100 psi).

The object of this standard is to establish requirements for the dimensions, characteristics and test methods relating to elastomer traffic cone markers used as highway signalling devices or work zone indicators.

Defines general terms, in English and French, applicable to building and civil engineering works. Comprises a) fundamental concepts which may be the starting point for other, more specific, definitions; b) more specific concepts used in several areas in building and that may be used commonly in standards, regulations and contracts.

1. Scope Note: This Preliminary Standard has been prepared primarily for critical review and is subject to change prior to publication as a formal Standard. 1.1 This Standard provides requirements for material selection, design, and construction of fixed concrete offshore structures. It is intended for use by engineers experienced in the design and construction of offshore structures.

1. Scope The requirements of the Standard are based on engineering design practices and research that have evolved during the development of concrete structures for the exploitation of offshore oil and gas resources. The Standard is not intended to be a detailed design manual and does not provide complete design procedures. The Standard and the Commentary are intended to supplement, not…

Describes a method of calculating the heat balances as well as the sweat rate that the human body should produce to maintain this balance in equilibrium. The various terms used show the influence of the different physical parameters. It does not predict the physiological response of individual subjects, but only considers standard subjects in good health and fit for the work they perform.