1. Scope and Application
1.1
This Standard applies to the design, based on limit states, of structural members cold formed to shape from carbon or low-alloy steel, strip, or plate up to 25 mm thick and intended for load-carrying purposes in buildings. For
application other than in buildings, supplementary specifications shall be used where necessary to account for differences in structural…
Agricultural tractors - Operator's workplace, access and exit - Dimensions
This National Standard of Canada is based on International Standard ISO 4252:1992.
1 Scope
This International Standard specifies design dimensions of a tractor for
agriculture concerning
a) minimum dimensions of access doorways;
b) number, location and minimum dimensions of emergency exits;
c) minimum internal clearance dimensions.
It applies to tractors for agriculture having…
1. Scope
1.1
This Standard applies to concrete masonry units made from Portland cement,
water, and aggregates, with or without the inclusion of other materials as
defined.
Note: This Standard does not apply to concrete brick masonry units. For such
units refer to CSA Standard A165.2.
1. Scope
1.1
This Standard applies to concrete building brick and similar solid units
manufactured from a mixture of Portland cement, water, and suitable aggregates
with or without the inclusion of other materials.
Note: This Standard does not apply to concrete masonry units. For such units
refer to CSA Standard A165.1.
1. Scope
1.1
This Standard applies to concrete masonry units having integral facings on one
or two sides in gloss, semigloss, or matte finish. The surfaces exposed to
view shall be covered at the point of manufacture with a binder and inert
filler or cement.
1.1
This Standard covers the design, construction, operation, and maintenance of
oil and gas industry pipeline systems, which convey
(a) liquid hydrocarbons, including crude oil, multiphase fluids, condensate,
liquid petroleum products, natural gas liquids, and liquefied petroleum gas;
(b) oilfield water;
(c) oilfield steam; or
(d) gas.*
*Designers are cautioned that the requirements in…
Dental Rotary Instruments - Nominal Diameters and Designation Code Number
This National Standard of Canada is equivalent to International Standard ISO
2157:1992.
1 Scope
This International Standard specifies the nominal diameters of the working
parts of dental rotary instruments, for example burs, laboratory burs, grinding
instruments, diamond instruments, mandrels, etc. and the corresponding
designation. It does not cover the diameters of root canal…
1. Scope
1.1
This Standard applies to the protection of persons from the hazards arising
from the use of mobile or stationary machinery. It provides the criteria to be
observed and the description, selection, and application of guards and safety
devices. Where a current CSA Standard exists for a specific type of machinery
(eg. Z114, CAN/CSA-Z143), it shall take precedence over this…
Safety of household and similar electrical appliances - Part 2: Particular
requirements for commerc...
This National Standard of Canada is based on International Standard CEI/IEC 335-2-36:1993.
1. Scope
This clause of part 1 is replaced by:
This standard deals with the safety of electrically operated commercial cooking
ranges, ovens, hobs, hob elements and similar appliances not intended for
household use, their rated voltage being not more than 250 V for single phase
appliances…
Steel - Surface finish of hot-rolled plates and wide flats - Delivery requirements
This National Standard of Canada is based on International Standard ISO 7788-1995.
1 Scope and Field of Application
This CSA Standard specifies delivery requirements which apply to the surface finish of hot-rolled plates and wide flats rolled on reversing mills, with nominal thicknesses equal to or less than 150 mm.
For plates with a thickness greater than 150 mm and for special…
