1. Scope
1.1
This Standard applies to signs intended for use in the workplace for the
purpose of communicating a regulatory, warning or informational message with
the emphasis on safety and/or health. It describes requirements for the design
of signs and includes recommendations for their selection and placement.
1.2
This Standard also includes requirements for signs that are not…
1. Scope
1.1
This Standard covers requirements for establishing and maintaining the
certification of welding inspection organizations. These requirements apply to
each welding inspection centre seeking certification.
1.2
This Standard provides for organizations to be certified for the inspection of
one or more product categories and for the use of one or more inspection
methods.
1…
1. Scope
1.1 General
This Standard provides requirements for the design, manufacture, construction,
modification, operation, inspection, testing, and maintenance of passenger
ropeways.
The requirements of this Standard are adequate under conditions normally
encountered in the industry. Requirements for abnormal or unusual conditions
are not specifically provided for, nor are all…
1. Scope
1.1 This standard appies to an emulsion filler for interior and exterior
use on rough surfaces such as concrete, stucco, and cinder and concrete
blocks before topcoating.
1.2 The filler complying with this standard is intended for filling
depressions and small cracks on new and painted porous surfaces that
have been properly prepared. This…
Information technology - Software packages - Quality requirements and testing
This National Standard of Canada is equivalent to International Standard
ISO/IEC 12119:1994.
1 Scope
This International Standard is applicable to software packages. Examples are
text processors, spreadsheets, data base programs, graphics packages, programs
for technical or scientific functions, and utility programs.
It establishes
- requirements for software packages (…
Quality management - Guidelines for configuration management
This National Standard of Canada is equivalent to International Standard ISo
10007:1995.
1 Scope
This International Standard gives guidance on the use of configuration
management in industry and its interface with other management systems and
procedures. It first provides a management overview (clause 4), then describes
the process, organization and detailed procedures.
It is…
This National Standard of Canada is equivalent to International Standard ISo
10013:1995.
1 Scope
This International Standard provides guidelines for the development,
preparation and control of quality manuals tailored to the specific needs of
the user. The resultant quality manuals will reflect documented quality system
procedures required by the ISO 9000 family of International…
Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for...
Provides brief summaries of the basic International Standards for determining emission sound pressure levels from all types of machinery at work station and at other specified locations and gives guidance on the process of selection. The guidance given does apply only to airborne sound.
Commentary on CSA Standard S136-94, Cold Formed Steel Structural Members
1. Scope and Application
1.1
The Scope establishes that CSA Standard S136-94 applies to the design of cold
formed steel structural members and that the design is based on limit states
design (LSD) methods. Such members are roll or brake formed from carbon or low
alloy flat-rolled steel products. Cold formed members find application where
large surfaces are needed, as in deck and…
1. Scope
1.1 This standard applies to work suit systems that:
- reduce thermal shock upon entry into cold water;
- delay the onset of hypothermia during immersion in cold water;
- provide acceptable flotation and minimize the risk of drowning;
- do not impair the wearer's ability to perform his normal working
duties.
1.2…
