Rechercher

This International Standard specifies manufacturing methods and materials that will result in durable hard cover and soft cover binding for books manufactured in commercial quantities. It does not apply to hand bookbinding, individual casing or binding of archival matter. Nor does it apply to fine binding which does not serve its normal purpose of primarily protecting a book block (such as…

Introduction The Fuel Safety Handbook is intended to provide the basic information which is essential to gas technicians working with natural gas and propane fuel gases in Ontario. The Fuel Safety Handbook is intended to address the knowledge needed by Ontario gas technicians seeking to fulfill the requirements of the new Training and Certification Regulation (348/96) under the Energy Act,…

1. Scope 1.1 This Standard sets forth methods for both new installation and replacement installation of factory-assembled windows and exterior doors that are intended for vertical installation in small buildings primarily used for residential occupancy. 1.2 This Standard provides minimum requirements that will help to ensure the installation of windows in an effective manner, such…

This National Standard of Canada is equivalent to International Standard ISO 11850:1996. 1 Scope This International Standard specifies general safety requirements for specially designed self-propelled forestry machines defined in ISO 6814:1983, clause 4, and machines adapted for forestry applications when operating on work sites or transporting between sites.

1. Scope 1.1 This Standard applies to the design, construction, installation, operation, inspection, test, maintenance, alteration, and repair of suspended elexating platforms designed to carry personnel for the purpose of gaining access to exterior and interior building surfaces and other structures.

1. Scope 1.1 The Standard sets out requirements for macrocomposite pipes consisting of a welded aluminum tube laminated by a melt adhesive to layers of polyethylene inside and outside the aluminum tube. The Standard also provides requirements for fittings (connectors) for use with this composite pipe. The pipes considered in this Standard are for use in potable water supply systems and…

1. Scope 1.1 The Standard sets out requirements for macrocomposite pipes consisting of a welded aluminum tube laminated by a melt adhesive to layers of crosslinked polyethylene inside and outside the aluminum tube. The Standard also provides requirements for fittings (connectors) for use with this composite pipe. The pipes considered in this Standard are for use in potable cold- and hot…

Object The object of this Code is to establish safety standards for the installation and maintenance of electrical equipment. In its preparation, consideration has been given to the prevention of fire and shock hazards, as well as proper maintenance and operation. Compliance with the requirements of this Code and proper maintenance will ensure an essentially safe installation.…

This National Standard of Canada is based on International Standard CEI/IEC 598-2-19:1981 (first edition, 1981), including Amendments 1:1987, and 2:2002. Note - Amendment No. 2 reaffirmed 2007-03-28. 19.1 Scope This section of Part 2 of IEC Publication 598 specifies safety requirements for air-handling luminaires for use with a ventilation duct or ventilated space (plenum), for use with…

1. Scope 1.1 This Standard applies to occupational diving operations conducted in connection with all types of work and employment, and describes the requirements for minimal competency levels for all personnel directly associated with the identified techniques of diving. Canadian safety and health legislation requires that all workers be competent to perform the work assigned to them.…