Rechercher

Is applicable to portable voltage detectors with or without a built-in power source to be used on electrical systems for voltages of 1 kV to 36 kV a.c., and frequencies from 15 Hz to 60 Hz. This part applies only to resistive voltage detectors used in contact with the part to be tested, as a single unit or as a separate device completed by an adaptable insulating pole covered in IEC 60855 or IEC…

This part of ISO 10333 specifies requirements, test methods, instructions for use and maintenance, marking, labelling and packaging, as appropriate, for lanyards and energy absorbers. Lanyards and energy absorbers are used together as a connecting subsystem in personal fall-arrest systems (PFAS) which will be specified in a future International Standard (see ISO 10333-6 in the Bibliography). Two…

1. Scope 1.1 This Standard addresses unreinforced concrete construction of housing and small buildings, as covered in Part 9 of the National Building Code of Canada (NBCC), as well as other concrete work, such as slabs on ground, driveways, walkways, patios, steps, and parking areas. Note: Construction that contains nominal reinforcement provided solely for crack control purposes is…

This National Standard of Canada is equivalent to International Standard ISO 8319-1:1996. 1 Scope This part of ISO 8319 specifies the dimensions, tolerances, mechanical properties and performance requirements of the working end of keys to be used for inserting and removing metal bone screws with hexagon drive sockets, used as surgical implants. Screw keys with a working end specified…

This National Standard of Canada is equivalent to International Standard ISO 14269-5:1997. 1 Scope This part of ISO 14269 specifies a test procedure which will provide for uniform measurement of the pressurization inside an operator enclosure of tractors and self-propelled machines for agriculture and forestry when equipped with a ventilation system.

This National Standard of Canada is equivalent to International Standard ISO 13485:1996. 1 Scope This International Standard specifies, in conjunction with ISO 9001, the quality system requirements for the design/development, production and, when relevant, installation and servicing of medical devices. This International Standard, in conjunction with ISO 9001, is applicable when…

This International Standard defines how user oriented performance of computer-based software systems (CBSS) may be measured and rated. A CBSS is a data processing system as it is seen by its users, e.g. by users at various terminals, or as it is seen by operational users and business users at the data processing center. A CBSS includes hardware and all its software (system software and…

This International Standard defines how user oriented performance of computer-based software systems (CBSS) may be measured and rated. A CBSS is a data processing system as it is seen by its users, e.g. by users at various terminals, or as it is seen by operational users and business users at the data processing center. A CBSS includes hardware and all its software (system software and…

This International Standard describes the requirements for automated, controlled shot-peening of metallic articles prior to electrolytic or autocatalytic deposition of nickel or chromium, or as a final finish, using shot made of cast steel, conditioned cut wire, ceramic shot or glass beads. The process is applicable to those materials on which test work has shown it to be beneficial within given…

1. Scope 1.1 This Standard outlines requirements and classifications for automatic and manual descent control devices intended for use in the workplace. These devices are not used for fall arrest. Appropriate fall protection equipment is also required in the presence of a fall hazard, except in the case of emergency egress. 1.2 This Standard applies to equipment intended to be used…