Rechercher

1. Scope 1.1 General This standard provides requirements for the design, manufacture, construction, modification, operation, inspection, testing, and maintenance of passenger ropeways and conveyors. Requirements for abnormal or unusual conditions are not specifically provided for, nor are all the details of engineering and construction prescribed. It is intended that all work…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60601-2-11:1997, (second edition, 1997-08). 1 Scope and Object This clause of the General Standard applies as follows: 1.1 Scope Addition: aa) This Particular Standard specifies requirements for the safety of GAMMA BEAM THERAPY EQUIPMENT intended for RADIOTHERAPY in human medical practice and includes EQUIPMENT…

The concept of "type" is fundamental to ODP systems; the interaction model of ODP-RM involves strongly-typed interactions. This Recommendation | International Standard: ? defines a framework for describing types of interest in ODP systems by determining what entities need to be typed and what needs to be said about the identified types. The primary focus of this work is the…

The concept of "type" is fundamental to ODP systems; the interaction model of ODP-RM involves strongly-typed interactions. This Recommendation | International Standard: ? defines a framework for describing types of interest in ODP systems by determining what entities need to be typed and what needs to be said about the identified types. The primary focus of this work is the…

1. Scope 1.1 General This Standard covers wrought steel flanges primarily intended for use in oil or gas pipeline systems. 1.2 Size, Grade, Nominal Pressure Class, and Category 1.2.1 Size This Standard covers flanges in sizes from NPS 1/2 to NPS 60, inclusive. (Refer to Appendix A, Table A1.) 1.2.2 Grade This Standard covers flanges from Grade 248 to Grade 483, inclusive.…

1. Scope 1.1 General This Standard covers steel valves primarily intended for use in oil or gas pipeline systems. The following types of valves are covered: (a) gate valves; (b) plug valves; (c) ball valves; and (d) check valves. 1.2 Size, Nominal Pressure Class, and Category 1.2.1 Size This Standard covers valves in sizes from NPS 2 to NPS 60, inclusive. (Refer to…

The EDA Standards Roadmap Workshop was sponsored by the CAD Framework Initiative (CFI), Electronic Design Automation Companies (EDAC), and SEMATECH with participation by interested industry groups. The Workshop was specifically aimed at developing an industry-wide roadmap for development of design and test standards within Electronic Design Automation (EDA). There were three working groups, each…

1. Scope 1.1 The scope statement indicates which aspects and parts of pipeline systems and which service fluids are covered by the Standard. ? Carbon dioxide was added as a new service fluid in 1996. The definition of gas was changed in 1983 to accommodate the coverage of gaseous service fluids other than fuel gas and sour gas; however, until 1996, none had been added. ? The carbon…

Specifies a common application layer protocol (message structure, formats and transmission procedures) to be used at standard interfaces in alarm transmission systems. Should be used at all such interfaces where equipment from one supplier is intended to inter-work with equipment from other suppliers.

Specifies the transport layer message structure, formats and transmission procedures to be used at standard interfaces in alarm transmission systems. Should be used at all such interfaces where equipment from one supplier is intended to inter-work with equipment from other suppliers, and where the underlying system architecture does not provide the necessary facilities to support the common…