Rechercher

ISO 15550 establishes the framework for ISO engine power measurement standards. It specifies standard reference conditions and methods of declaring the power, fuel consumption, lubricating oil consumption and test methods for internal combustion engines in commercial production using liquid or gaseous fuels. ISO 15550 applies to reciprocating internal combustion engines (spark-ignition or…

This International Standard is intended as a guideline for clinical researchers working with condoms. It suggests a series of laboratory tests to be conducted on the products to be used in any clinical investigation, so that it will be easier to relate the clinical results to the design and quality of the condoms used. This International Standard is not applicable to the design of clinical…

This International Standard specifies two methods for the determination of the resistance of rubber to abrasion by means of a rotating cylindrical drum device. The methods involve determination of the volume loss due to the abrasive action of rubbing a test piece over a specified grade of abrasive sheet. Method A is for a non-rotating test piece and method B for a rotating test piece. For each…

This part of ISO 10333 specifies requirements, test methods, instructions for use and maintenance, marking, labelling and packaging, as appropriate, for vertical rails and vertical lifelines which incorporate a sliding-type fall arrester. When connected to a full-body harness as specified in ISO 10333-1, vertical rails and vertical lifelines which incorporate a sliding-type fall arrester…

1. Scope 1.1 This Standard specifies minimum requirements for the design, construction, installation, operation, inspection, testing, alteration, and maintenance of permanently installed manlifts for the vertical transportation of authorized personnel and, where authorized, their tools and equipment. Such manlifts are typically installed in structures such as grain elevators, radio antennas…

ISO/ASTM 51707 defines possible sources of error in dosimetry performed in gamma, X-ray (bremsstrahlung) and electron irradiation facilities and offers procedures for estimating the resulting magnitude of the uncertainties in the measurement results. Basic concepts of measurement, estimate of the measured value of a quantity, 'true' value, error and uncertainty are defined and discussed…

This International Standard specifies test methods for the measurement, determination and declaration of the noise emission from hand-held non-electric power tools. It prescribes the loading and working conditions under which can be determined the noise emission, under specified load conditions, expressed as the sound power level, andthe emission sound pressure level at the work station under…

This International Standard provides guidelines to enable translators and translation support staff to record, maintain and quickly and easily retrieve terminological information in connection with translation work. The quality of a translation can be measured partly in terms of linguistic elements, such as style and grammar, and partly in terms of the accurate use of the terminology involved.…

This International Standard establishes the terminology for soil stabilizers used in road construction and pavement works. It provides the terminology for the machine and its components, also the definitions of operation principles and parameters. This International Standard also establishes the parameters required for the technical characteristics of the whole machine and its components, such as…

This National Standard of Canada is equivalent to International Standard ISO/IEC 14598-2:2000 (first edition, 2000-02-01). 1 Scope This part of ISO/IEC 14598 provides requirements, recommendations and guidelines for a supporting function which is responsible for the management of software product evaluation and for technologies necessary for software product evaluation. The role of the…