Guidelines for the selection of statistical methods in standardization and specification
ISO/TR 13425:2006 gives guidance on the selection and an overview of all the referenced standards, guides, technical reports and DIS developed by ISO/TC 69 from a user prospective. DIS are drafts which can be amended. Both categories are documents, which are available to the public. ISO/TR 13425:2006 also gives two descriptions of the content of the standards by two sets of abstracts: non-…
1 Scope
1.1 General
This Standard specifies requirements for the performance, design, testing, marking, and information for use of full body harnesses. Full body harnesses are intended for use as body supports in personal fall arrest systems and in other work situations that involve the risk of falling.
1.2 Exclusions
This Standard does not cover full body harnesses for use in…
Canadian Electrical Code, Part I (20th Edition), Safety Standard for Electrical Installations
Scope
This Code covers all electrical work and electrical equipment operating or intended to operate at all voltages in electrical installations for buildings, structures, and premises, including factory-built relocatable and non-relocatable structures, and self-propelled marine vessels stationary for periods exceeding five months and connected to a shore supply of electricity continuously or…
Industrial automation systems and integration — Product data representation and exchange — Part 240:...
ISO 10303-240:2005 specifies the use of the integrated resources necessary for the scope and information requirements for the exchange, sharing and long term data retention of computer-interpretable process plan information for both numerical control (NC) and manually operated applications and associated product definition data.
The following are within the scope of ISO 10303-240:2005:…
Consists of B137.0, B137.1, B137.2, B137.3, B137.4, B137.4.1, B137.5, B137.6, B137.8, B137.9, B137.10, B137.11 and B137.12
B137.0-05 Definitions, general requirements, and methods of testing for thermoplastic pressure piping
1 Scope
1.1 This Standard specifies requirements for thermoplastic pressure piping. It includes reference publications, definitions, abbreviations, general…
1 Scope
1.1 General
This Standard covers steel valves primarily intended for use in oil or
gas pipeline systems. The following types of valves are covered:
(a) gate valves;
(b) plug valves;
(c) ball valves; and
(d) check valves.
1.2 Size, nominal pressure class, and category
1.2.1 Size
This Standard covers valves in sizes from NPS 2 to NPS 60. (See Table
.1.)
1.2.2 Nominal pressure class
This…
1 Scope
This International Standard is applicable to fully insulating spliced or hook ladders with
extension or having a combination of insulating and conductive sections and used for live
working on a.c. or d.c. electrical installations at 1 000 V and above for a.c. and 1 500 V and
above for d.c.
The ladders are classified functionally as Category 1 and Category 2.
This standard concerns only…
LIVE WORKING – FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL
1 Scope
This International Standard is applicable to flexible insulating covers (line hoses) for the
protection of workers from accidental contact with live or earthed electrical conductors and for
the avoidance of short circuits during live working.
1.1 Classes
Five classes of conductor covers, differing in electrical characteristics, are provided and
designated as class 0, class 1, class 2,…
1. SCOPE
1.1 This standard applies to immersion suit systems for marine abandonment and constant wear. This standard applies to suit systems that reduce thermal shock upon entry into cold water; delay the onset of hypothermia during the immersion in cold water; provide acceptable flotation and minimize the risk of drowning; do not impair the wearer's ability to perform fundamental survival…
Electroacoustics - Hearing aids - Part 8: Methods of measurement of performance characteristics of h...
Describes methods for a test which simulates the acoustical effects of a median adult wearer on the performance of a hearing aid. Establishes certain guidelines for simulated in situ measurements of hearing aids; it describes a simplified method for simulated in situ measurements of hearing aids and a description for determination of the directivity index (DI) of directional microphones in…