Rechercher

This Guide establishes rules for the presentation of translations of ISO publications into languages other than the official ISO languages. It applies to translations of draft International Standards, International Standards, Technical Reports, Guides, other copyrighted ISO publications. It does not apply to translations of International Standards which are published in the form of national…

Applies to non-perforated magnetic tape used for professional and domestic analogue sound recording and reproduction. Lists and defines the methods of measurement and equipment necessary to determine the mechanical characteristics of magnetic recording tape. Will also enable users of magnetic tapes to compare technical product data of different manufacturers, produced in accordance with this…

Applies to the IEC System of plugs and socket-outlets rated 16 A 250 V a.c. for household and similar purposes for the connection of equipment to distribution systems having nominal voltages between 200 V and 250 V a.c., in so far as dimensional requirements are concerned. The object of this part is to provide a standard for a safe, compact and practical IEC 250 V system of plugs and socket-…

1. Scope 1.1 This Standard applies to cord-connected and permanently connected electrically heated pottery kilns for use on nominal system voltages of 600 V or less, designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 This Standard does not apply to electrical equipment employing high-frequency currents or industrial heating equipment.

1. Scope 1.1 This Standard applies to single- and multiple-conductor thermoset insulated wires and cables of the sizes specified in Clause 4.1.4, intended for installation in accordance with the Rules of the Canadian Electrical Code, Part I, on systems having nominal voltages of 5000 V and less. 1.2 This Standard does not cover shielded constructions.

1. Scope 1.1 This Standard contains the requirements for the quality assurance program applicable to the commissioning phase of a nuclear power plant. 1.2 This Standard embodies the relevant quality assurance requirements of CSA Standard CAN3-N286.0, and is the governing Standard for commissioning quality assurance activities in the event of any conflicting requirements. 1.3…

The following characteristics of fuses are specified in addition to IEC Publication 269-1: - minimum rated breaking capacities; - time-current characteristics; - I2t characteristics; - standard conditions of constructions; - power dissipation and acceptance.

Provides methods for evaluating the performance of all electrical and pneumatic analogue chart recorders operating from a standardized signal which may be used in process control. Continuous and dotted line traces, multiple-pen and multiple-channel instruments are covered.