Shall be used in conjunction with detail specifications concerning each pump model. Includes functional requirements, quality assurance provisions, qualification tests, acceptance tests, storage and packaging. A schematic summary is provided in the annex for easy reference to the contents of this International Standard.
Documentation — International Standard Recording Code (ISRC)
Is intended to define and promote the use of a standard code (ISRC) for the unique identification of recordings or parts of a recording. Guidelines for the use of the ISRC are given in the annex. The ISRC has been prepared to provide a means of identifying audio, video or audio-video recordings internationally. It is not to be used for the numbering of audio, vidio or audio-video carriers.
Intended to reduce the innumerable dimensions of cotton bales. Standardization of the dimensions of bales of man-made fibres might be the subject of a future International Standard. Lays down the nominal overall dimensions and the bale density of banded cotton bales. Applicable to the shaping and forming, the transport and opening of the bales. Not applicable to wrapping, banding, and marking of…
Guide for Selecting and Implementing the CAN3-Z299-85 Quality Assurance
Program Standards
1.1 Scope of Z299.0
1.1.1 This Guide explains the intent and compares the increasing comprehensiveness and sophistication of the four Quality Assurance Program Standards in the CAN3-Z299 series. Guidance is provided for selecting appropriate Standards for given products or services and for developing and implementing the Quality Assurance Programs.
Note: References in this Guide to…
1. Scope
1.1
This Standard applies to insulated pressure wire connector type cable splicing
kits for use with underground cables intended for direct earth burial, and for
use with conductors rated at 90°C and 600 V or less, in accordance with the
Canadian Electrical Code, Part I.
1.2
The cable splicing kits include the following:
(a) pressure wire connectors intended for use with…
Specifies the characteristics of products with metric dimensions and nominal diameters from 0,6 mm up to and including 50 mm; includes specifications with reference to International Standards; gives an example for the designation.
Specifies the characteristics of products without (type A) and with split pin holes (type B) with metric dimensions and nominal diameters from 3 mm up to and including 100 mm with reference to International Standards; gives examples for the designation.
Specifies the characteristics of products without (type A) and with split pin hole (type B) with metric dimensions and nominal diameters from 3 mm up to and including 100 mm; includes specifications with reference to International Standards; gives examples for the designation.
Electrical installations of buildings - Part 6: Verification - Chapter 61: Initial verification
Every installation shall, during erection and/or on completion
before being put into service by the user, be visually inspected
and tested to verify, as far as practicable, that the requirements
of this standard have been met.
Rubber, vulcanized — Determination of adhesion to wire cord
Two methods are given which are applicable primarily to test pieces prepared in the laboratory under standard conditions, such as may be used for the development and control of materials and processes used in the manufacture of products reinforced with wire cord. Test pieces of cord and rubber are prepared together by vulcanizing them under pressure. In method 1 the exterior surface of the rubber…
