Rechercher

This National Standard of Canada is equivalent to International Standard ISO/IEC 8880-1:1990. 1 Scope This part of ISO/IEC 8880 specifies the protocol combinations to be used to support the OSI Network Service defined in ISO 8348 and its Addendum 1. The field of application of this part of ISO/IEC 8880 is that of the environments defined in the other parts of ISO/IEC 8880. The field…

This National Standard of Canada is equivalent to International Standard ISO/IEC 8880-2:1990. 1.1 Scope This part of ISO/IEC 8880 describes the provision and support of the Connection-mode Network Service defined in ISO 8348. The field of application of ISO/IEC 8880-2 is the environments defined in 1.5.

This National Standard of Canada is equivalent to International Standard ISO/IEC 8880-3:1990. 1.1 Scope This part of ISO/IEC 8880 describes the provision and support of the Connectionless-mode Network Service defined in ISO 8348. The field of application of ISO/IEC 8880-2 is the environments defined in 1.5.

1.1 This Standard covers barrel-type hydrants with compression shut-off and slide gate shut-off, for general water works service. 1.2 Hydrants shall be designed for a minimum working pressure of 1000 kPa. 1.3 Hydrants of special design, including those having built-in hose gates, and hydrants designed for higher working pressure are not covered by this Standard. 1.4 Hydrants with…

1. SCOPe 1.1 This Standard is intended to cover essential requirements for ensuring satisfactory performance of light attack apparatus for fire-fighting service. 1.2 The type of apparatus covered by this Standard is intended to supplement the standard apparatus normally used by public fire departments.

These requirements apply to Factory-Built Type 'A' Chimneys which do not require field fabrication. They are for use with gas and liquid fuel-fired residential appliances and building heating equipment, where the appliance or equipment flue-gas temperatures do not exceed 540 degrees C. They are intended for use in accordance with the National Building Code of Canada, Installation Code…

1.1 Covers the design and construction of Type B (round or oval) and Type Bw Gas Vents. Type B Gas Vents are intended for the venting of flue gases having temperatures not exceeding 245 degrees C, from gas-fired appliances certified with draft hoods or diverters. Type BW Gas Vents are intended for the venting of flue gases from gas-fired wall furnaces and the maximum input to a Type Bw Gas…

1.1 These requirements cover the construction and performance of heat shields for vertical installation between heat producing appliances, chimney connectors and combustible construction. 1.2 Heat shields are intended for attachment to combustible construction for the reduction of specified minimum clearances for heat producing appliances. 1.3 Heat shields are rated on a percentage…

1.1 These requirements cover lining systems for new masonry chimneys. 1.2 Liners are for use with gas, liquid and solid fuel-fired residential appliances and building heating equipment, where the flue-gas temperatures normally do not exceed 650 degrees C. They are intended for use in accordance with the National Building Code of Canada, the Installation Code for Oil Burning Equipment, CAN/CSA-…

1.1 This method describes a procedure developed for colour matching of textiles. 1.2 Three different types of light sources are provided. These are intended to simulate north-sky daylight, incandescent lighting and commercial (minus red) fluorescent lighting.