Canada Standard Children's Sizes 2 to 6X, Girls' Sizes 7 to 16 and Boys' Sizes
7 to 2...
Applies to the dimensions considered essential to provide for the fit of coats
and jackets which are insulated for winter wear, with or without hoods, that
are intended for wear by little girls and little boys (CSS regular range, sizes
2 to 6X), girls (CSS regular range, sizes 7 to 16) and boys (CSS regular range,
sizes 7 to 20).
Spot Radiography of Welded Butt Joints in Ferrous Materials
1.1 Describes the procedures for spot radiography of ferrous butt welds that
have a joint efficiency factor of not more than 85%, or welded butt joints in
ferrous materials for which the design unit stress factor does not exceed 85%
of the allowable unit stress of the base metal. It also includes
recommendations on acceptance criteria by which the welded butt joints are to
be assessed.…
Manteaux et blousons d'hiver, Tailles Canada Standard 2 à 6X pour enfants, 7 à
16 pour filles e...
S'applique aux mesures jugées indispensables au bon ajustement des manteaux et
blousons isolés pour l'hiver, avec ou sans capuchon, pour fillettes et
garçonnets (tailles courantes TCS 2 à 6X), filles (tailles courantes TCS 7 à
16) et garçons (tailles courantes TCS 7 à 20).
Distributeur à installations de l'abonné - Interface métallique DS1
Vise l'interface métallique entre le distributeur et les installations de
l'abonné (IA), aussi appelée interface réseau (IR), pour le débit DS1. Elle
énonce les critères auxquelles une IR doit satisfaire pour assurer la
compatibilité entre le distributeur et les IA. La norme ne s'applique pas aux
interfaces entre deux distributeurs, entre deux réseaux commutés, entre un…
Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard mic...
Applies to laboratory standard microphones meeting the requirements of IEC 61094-1 and other types of condenser microphones having the same mechanical dimensions or specifies a primary method of determining the pressure sensitivity so as to establish a reproducible and accurate basis for the measurement of sound pressure.
This publication supersedes IEC 60327.
Procedure for use in the preparation of maximum lamp outlines
Provides guidelines for the preparation of maximum lamp outlines for the specific bulb shapes and caps noted. Is primarily for the use of lamp standardizing committees.
Rubber compounding ingredients — Carbon black — Method of evaluation in styrene-butadiene rubbers
Specifies a standard test formula for evaluation of carbon black in rubbers. Describes the evaluation of vulcanization characteristics as well as the tensile stress strain properties of vulcanized test mixes. Gives the contents of the test report.
Portable Refrigerators for Use With HD-5 Propane Gas
This is a searchable PDF.
1.1 Scope
1.1.1 This standard covers gas-fired refrigerators, hereinafter referred to as refrigerators or appliances, having refrigerated spaces for: (a) Storage of foods; or (b) Storage of foods and making ice; or (c) Storage of frozen foods and making ice; or (d) Storage of foods and the storage of frozen foods and making ice. It applies to newly produced,…
Norme IEEE sur les joints des câbles à diélectrique extrudé dont les tension
nominales sont compris...
La présente Norme nationale du Canada est équivalente à la norme de l'Institute
of Electrical and Electronic Engineers standard IEEE 404-1986.
Elle établie les caractéristiques nominales électriques et les exigences
d'essai des joints de câbles blindés à diélectrique extrudé dont les tensions
nominales sont comprises entre 5 000 et 46 000 V, et des câbles à diélectrique
stratifié…
