Rechercher

Describes measuring methods and requirements for test arrangements to be applied for evaluating compliance with this standard together with the means of indicating compliance both of the specified characteristics of focal spots and the radiograms prepared in checking these characteristics.

Provides a basis for the development of individual new standards concerning the performance and constructional characteristics of such apparatuses which are designed to determine specific physical and/or chemical quantities of measured materials.

Specifies a general framework addressing the following six components: conformance in the standard itself; test requirements document (defining what shall be tested for a computer graphics standard); test specifications document (addressing the test technique and the content of each test); test method (defining the implementation of the test specification document, including the test software);…

Gives pipeline installation terminology and describes the installation procedures. Refers generally to GRP pipes in particular stiffness classes for which performance requirements have been specified in at least one product standard, but it can also be used as a guide for the installation of pipes of other stiffness classes. Annex A gives a classification of native soils.

This standard applies to TC-44B multiwall paper bags, consisting of paper having a minimum total grammage of 325 g/m², used for the transport of dangerous goods. It states their required material, construction, closures, performance and marking.

1.1 This Standard applies to temperature-indicating and -regulating equipment* for voltages up to and including 600 V between conductors and intended for general household and industrial use in nonhazardous locations, in accordance with the Rules of the Canadian Electrical Code, Part 1. *For convenience the shorter term "equipment" is sometimes used herein. 1.2 This Standard…

1.1 This Standard establishes minimum requirements for all electrical work and electrical equipment operating, or intended to operate, in mines and quarries. 1.2 This Standard is intended to be used in conjunction with CSA Standard C22.1, the requirements of which apply unless modified in this Standard.

1.1 This Standard provides guidance to managers and engineers for the selection and application of reliability analysis methods. Its purpose is to (a) describe some of the reliability analysis methods which are most commonly used and are representative of international standards methods; (b) provide guidance for the selection of analysis methods depending on technology and application of…

1.1 This standard specifies the physical and chemical requirements for a well-milled or cast soda soap, or a mixture of soda and potash soaps, prepared from suitable fats, uniformly mixed, stabilized and thoroughly saponified. 1.2 Soap prepared in accordance with this standard is suitable for use in personal bathing and/or general cleaning. For guidance on the choice of soaps or detergents, see…