Rechercher

This standard applies to series of paper sizes which when folded, cut and trimmed, are intended for such applications as books, reports, brochures, pamphlets, leaflets, magazines, catalogues, columnar forms, educational notebooks, graph paper, loose-leaf refills, covers and bristols.

This standard applies to a series of trimmed paper sizes intended for such applications as correspondence, letterhead, memoranda, notepads, figuring pads, and copy and duplicating paper. The series provides a set of sizes that bear a constant logical relationship to one another.

1.1 This standard applies to general purpose printing bristols and to folding bristols. A standard for permanence of paper is in the course of preparation. 1.1.1 General purpose printing bristols are used for face and back letterpress and offset (lithographic) printing of booklet covers, circulars, announcements, programs, tickets, etc. Printed matter may include solids and solid…

1.1 This method of measuring colour can be applied to sulphate (kraft) and sulphite pulp mill effluents, providing their colours closely match the colour of the standard platinum-cobalt solution. The method cannot be applied to effluents of unusual colour, i.e., to dyed solutions. 1.2 The colur of an effluent is expressed in arbitrary colour units. One colour unit (C.U.) is equivalent to the…

This Standard covers materials and methods of construction for cast-in-place concrete and concrete precast in the field. Notes: (1) Design of concrete structures is covered in CSA Standard A23.3, Design of Concrete Structures; CSA Standard S6, Design of Highway Bridges; or CSA Standard S29, Concrete Railway Bridges. Design of some specialty concrete products is covered in…

1.1 General This Standard covers the principal methods of test for hardened and freshly mixed concrete and for concrete materials, as specified in CSA Standards A23.1 and A23.4. 1.2 Safety and Health Practices This Standard does not purport to address the safety problems associated with it use. It is the responsibility of the user of this Standard to establish appropriate safety and…

1.1 Finishing 1.1.1 This method contains procedures for finishing (smoothing) fabric after washing or dry cleaning. Three principal methods of pressing and a procedure for restoration after dimensional change are described. These procedures are usually used as follows: 1.1.1.1 Ironing - This method is applicable to washable fabrics. Such fabrics generally consist of cotton, linen,…

This National standard of Canada is equivalent to International standard ISO 7487/3:1986. This standard specifies the quality of recorded signals, the track layout, and a track format to be used on 130 mm (5.25 in) flexible disk cartridges intended for data interchange between data processing systems. NOTE - Numeric values in the SI and/or Imperial measurement system in this standard…

This National Standard of Canada is based on International Standard ISO 7788-1995. 1 Scope and Field of Application This CSA Standard specifies delivery requirements which apply to the surface finish of hot-rolled plates and wide flats rolled on reversing mills, with nominal thicknesses equal to or less than 150 mm. For plates with a thickness greater than 150 mm and for special…

1.1 This Standard applies to the design and development, modification, documentation, execution, and configuration management of computer programs used to perform analytical, scientific, and design computations during the design and analysis of safety-related nuclear power plant equipment, systems, structures, and components as identified by the owner. 1.2 The principal activities…