Rechercher

Provides the specification of management information within an Open System related to those operations of the OSI Data Link Layer specified by the specifications in this document.

Lays down specific standard requirements, including general characteristics and test conditions for microprocessor based radiation measuring devices.

Foreword Organizations of all types and sizes are giving increasing attention to establishing systems and procedures that will ensure that their operations are environmentally efficient. They are also considering ways by which the efforts being made in this regard and the results of those efforts can best be communicated to their various audiences. Environmental reporting is still in its…

1. Scope 1.1 This Standard applies to manufactured wiring systems for installation in accessible areas in dry, nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part 1. 1.2 This Standard applies to manufactured wiring systems having a maximum voltage rating of 600 V, and a maximum current rating of 30 A.

Scope Digital Geographic Information (DGI) has evolved into an essential element in the planning and conduct of civil and military operations. The required data volume, demands, and data complexity dictate that multi-national agreements for digital data standards be established to assure compatibility. In support of this aim, these standards define those aspects necessary to the exchange of DGI…

This National Standard of Canada is equivalent to International Standard ISO 7176-11:1992. 1 Scope This part of ISO 7176 specifies the construction of test dummies with nominal masses of 25 kg, 50 kg, 75 kg and 100 kg, intended for use as specified in other parts of ISO 7176. The test dummies are so designed that their centres of gravity with respect to a wheelchair under test are…

This National Standard of Canada is equivalent to International Standard ISO 7176-13:1989. 1 Scope This part of ISO 7176 specifies a test method for determining the coefficient of friction of a test surface that has a rough texture, such as unfinished concrete. In the event that the test method is used for smooth or polished surfaces, care should be exercised that the coefficient of…

This National Standard of Canada is equivalent to International Standard ISO 7176-2:1990. 1. Scope This part of ISO 7176 specifies methods for determining the dynamic stablility of electric wheelchairs.

This National Standard of Canada is equivalent to International Standard ISO 7176-9:1988. 1. Scope and Field of Application This part of ISO 7176 specifies methods for testing the effects of rain on the functioning of electric wheelchairs used outdoors and the effects of temperature changes on the functioning of wheelchairs taken outdoors after a period indoors. This part of ISO 7176…

1.1 This method provides for the determination of the mass percentage of saturates, monoaromatics, diaromatics and polyaromatics in petroleum fractions that distil below 450°C. The method does not apply to samples that contain higher than 5% olefin by volume. 1.2 This test method utilizes supercritical fluid chromatography (SFC) for separation of hydrocarbons and flame ionization detection…