Rechercher

1.1 SCOPE 1.1.1 This standard applies to newly produced type 2 clothes dryers (see Part IV, Definitions) hereinafter referred to as dryers, constructed entirely of new, unused parts and materials: a. For use with natural gas; b. For use with manufactured gas; c. For use with mixed gas; d. For use with propane gas; e. For use with liquefied petroleum gases; and f. For use with LP gas-…

1. Scope 1.1 This Standard provides criteria for the aspects of HVAC systems that are particular to health care facilities. These criteria lead to more stringent requirements that are above and beyond those generally applied in planning, designing, constructing, commissioning, maintaining, and operating HVAc systems. 1.2 This Standard sets values of certain parameters, identifies…

1. Scope 1.1 This Standard applies to ac and dc type power supplies, including rack-mounted and modular units, that (a) are of dry or liquid-filled construction; (b) have a rated voltage not exceeding 600 V; and (c) are for commercial, industrial, and residential indoor and outdoor use in nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I. Note:…

1. Scope 1.1 This Standard outlines a means for certifying eligible welding inspectors by examination in one of three levels. It describes the responsibilities associated with each level and the basic technical functions of welding inspectors. This Standard also outlines a means of registering welding inspection trainees. Note: The certification document should indicate in relation…

This National Standard of Canada is equivalent to International Standard ISO 14971:2000. 1 Scope This International Standard specifies a procedure by which a manufacturer can identify the hazards associated with medical devices and their accessories, including in vitro diagnostic medical devices, estimate and evaluate the risks, control these risks and monitor the effectiveness of the…

1.1 Scope 1.1.1 This standard applies to newly produced manually operated electric gas ignition systems (see Part IV, Definitions), hereinafter referred to as ignition systems, and ignition system components constructed entirely of new, unused parts and materials, which are intended to form an integral part of a gas appliance. An ignition system shall ignite gas at the main or pilot…

1.1 Scope 1.1.1 This standard applies to newly produced gas appliance connectors constructed entirely of new unused parts and materials, having nominal internal diameters of ¼, 3/8, ½, 5/8, 3/4, and 1 inch, and having fittings at both ends provided with taper pipe threads for connection to a gas appliance and to house piping. This standard covers assembled appliance connectors not exceeding…

1.1 Scope 1.1.1 These requirements apply to gas convenience outlets (see part IV, Definitions), hereinafter referred to as gas outlets, and optional enclosures (see part IV, Definitions), capable of operation at ambient temperatures between 32°F and 200°F (0°C and 93.3°C) if intended for Indoor Use Only, or between -20°F and 200°F (-28.8°C and 93.3°C) if intended for Indoor/Outdoor Use, and at…

This International Standard specifies a method for the determination of selected nitrophenols (see Table 1) in drinking, ground and surface water in mass concentrations _ 0,5 _g/l1). Table 1 — Nitrophenols to which this method is applicable CAS No. CAS No. 2-Nitrophenol 88-75-5 2,4-Dinitrophenol 51-28-5 3-Nitrophenol 554-84-7 2,5-Dinitrophenol 329-71-5 4-Nitrophenol 100-02-7 2,6-…

This International Standard specifies a method for the determination of the ester value of an essential oil. This method is not applicable to essential oils containing lactones or an appreciable proportion of aldehydes.