Short-link chain for lifting purposes — Grade T, (types T, DAT and DT), fine-tolerance hoist chain
This International Standard specifies requirements for fine-tolerance hoist chain of Grade T (types T, DAT and DT)
for use with manually operated or power-driven chain hoists1).
It is applicable to electrically welded, round, steel short-link chain, heat-treated and tested in accordance with the
general conditions of acceptance of ISO 1834, in the nominal chain size range from 3 mm to 22 mm.
NOTE…
This International Standard specifies the general requirements for the construction as well as the performance of
type tests of magnetic compasses on board small craft of hull length up to 24 m. It refers to liquid magnetic
compasses, which can be inspected (e.g. not sealed), either equipped with a direct reading system, or of the
reflecting/projecting type.
This International Standard also…
Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — P...
This part of ISO 17123 specifies field procedures to be adopted when determining and evaluating the precision (repeatability)
of theodolites and their ancillary equipment when used in building and surveying measurements. Primarily,
these tests are intended to be field verifications of the suitability of a particular instrument for the immediate task
at hand and to satisfy the requirements of…
Metallic and other inorganic coatings — Electrochemical measurement of diffusible hydrogen in steels...
This International Standard describes a method that uses an electronic hydrogen detection instrument for measuring
relative, diffusible hydrogen concentrations in bare steels or in plated steels after the coating has been removed. It is
assumed that the hydrogen is uniformly distributed throughout a part.
The method does not measure actual hydrogen concentration. However, oxidation current…
Mechanical standardization of semiconductor devices - Part 6-2: General rules for the preparation of...
IEC 60191-6-2:2001 covers the requirements for the preparation of drawings of integrated circuit outlines for the various ball terminal packages, e.g. ceramic ball grid array (C-BGA), plastic ball grid array (P-BGA), tape ball grid array (T-BGA) and others as well as column terminal packages, e.g. ceramic column grid array (C-CGA).
Mechanical standardization of semiconductor devices - Part 6-2: General rules for the preparation of...
IEC 60191-6-2:2001 covers the requirements for the preparation of drawings of integrated circuit outlines for the various ball terminal packages, e.g. ceramic ball grid array (C-BGA), plastic ball grid array (P-BGA), tape ball grid array (T-BGA) and others as well as column terminal packages, e.g. ceramic column grid array (C-CGA).
Applies to the family of fibre optic filters. These are passive components used to select specific wavelengths. The standard covers their optical, mechanical and envoronmental properties; as well as the measurement and text procedures for quality assessment.
Fibre optic interconnecting devices and passive components performance standard - Part 051-3: Single...
Contains the minimum initial test and measurement requirements and severities for a fibre optic attenuator to meet the requirements of category U environments.
The contents of the corrigendum of October 2004 have been included in this copy.
Fibre optic interconnecting devices and passive components performance standard - Part 052-3: Single...
Contains the minimum initial test and measurement requirements and severities for a fibre optic attenuator to meet the requirements of category U environments.
