Rechercher

This National Standard of Canada is equivalent to International Standard IEC 60601-2-12:03 (second edition, 2001-10). 1 Scope and object This clause of the General Standard applies, except as follows: 1.1 Scope Addition: This Particular Standard specifies the safety requirements for VENTILATORS, as defined in 2.1.125, intended for use in critical care settings. Continuous positive airway…

This National Standard of Canada is based on International Standard ISO 10079-1:1999 (second edition, 1999-08-15). 1 Scope This part of ISO 10079 specifies minimum safety and performance requirements for medical and surgical suction equipment (see Figure 1) for health care facilities such as hospitals, for domiciliary care of patients and for field and transport use. Although such equipment…

Scope 1.1 This Standard describes precautionary and remedial measures for preventing exposure to agents released or augmented because of actions undertaken during health care facility construction, renovation, maintenance, and repair work. Notes: 1) In this Standard, the term 'construction' includes not only construction but also renovation, maintenance, and repair work, unless the…

1 Scope 1.1 This Standard specifies the requirements for heating cables, cable sets, and surface heating device sets for use on system voltages not exceeding 750 V for installation in accordance with the Canadian Electrical Code, Part I. It applies to heating devices installed on or in metal and non-metallic pipes, tanks, vessels, and related equipment and to various surface heating applications…

1. SCOPE 1.1 This procedure defines the long-term thermal resistance (LTTR) of a foam product as the value measured after 5-year storage in a laboratory environment and provides means for its prediction based on an accelerated laboratory test. 1.2 This procedure, based on ASTM standard test methods C 1303 and C 518, can be applied to a wide range of preformed as well as field applied…

ISO 16014-1:2003 specifies a general method for determining the average molecular mass and the molecular mass distribution of polymers using size-exclusion chromatography (SEC). The average molecular mass and the molecular mass distribution are calculated from a calibration curve constructed using polymer standards. Therefore this method is classified as a relative method.

This International Standard presents an illustrated vocabulary of the most common ancillary devices placed before, between and after dyeing and finishing machines. The terms thus defined are placed under the following headings: 1          Feeding of material 2          Guiding of material 3          Control of speed of material 4          Accumulation of material 5          Treatment of material…

ISO 16014-3:2003 specifies a method for determining the average molecular mass and the molecular mass distribution of polymers using size-exclusion chromatography (SEC) with organic eluent at a temperature lower than 60 °C. The average molecular mass and the molecular mass distribution are calculated from a calibration curve constructed using polymer standards.

ISO/IEC 19500-2:2003 specifies the General Inter-ORB Protocol (GIOP) for object request broker (ORB) interoperability. GIOP can be mapped onto any connection-oriented transport protocol that meets a minimal set of assumptions defined by this standard. ISO/IEC 19500-2:2003 also defines the Internet Inter-ORB Protocol (IIOP), a specific mapping of the GIOP which runs directly over connections that…