1. Definition
1.1 This standard applies to squares ordinarily used by carpenters, diemakers,
machinists, and others in determining angles when fabricating parts from wood,
metal or other materials.
Marking Material, Retroreflective Enclosed Lens, Flexible Type
1. DEFINITION
1.1 This standard applies to a flexible enclosed element type of
retroreflective marking.
1.2 For detailed information on uses, see par. 8.2.
Switching impulse tests on high-voltage insulators.
Applies to switching impulse tests on insulators intended for use on a.c. installations with highest voltage 300 kV and above. Defines switching impulse characteristics of insulators and prescribes the conditions under which the specified values of these characteristics shall be verified. Prescribes methods for switching impulse tests on insulators under standard conditions.
Safety in electro-heat installations - Part 2: Particular requirements for resistance heating equipm...
Cancels and replaces the previous edition which had the status of a report. Applies to direct and indirect resistance heating installations. Standardizes the safety requirements to be respected in the industrial furnaces energized with d.c. or a.c. single-phase or polyphase voltage of frequency up to 60 Hz.
High-voltage coaxial connectors used in nuclear instrumentation
Applies to coaxial connectors associated with electrical
measuring instruments used in nuclear instrumentation. Establishes standard dimensions of the mating parts, construction and mounting rules, voltage rating and test voltages, mininium insulation requirements, maximum contact resistances and operating conditions for two types of high-voltage connectors.
Methods for measuring the performance of electric kettles and jugs for household and similar use
Applies to electric kettles and jugs with a capacity up to 2,5 l. States and defines the principal performance characteristics which are of interest to the user and describes the standard methods for measuring these characteristics.
Oil Fired Warm Air Heating Appliances for Mobile Housing and Recreational
Vehicles
1. Scope
1.1 These requirements apply to flue-connected oil-fired forced warm air heating appliances which provide complete separation of the combustion system, including the air for combustion and flue products from the atmosphere of the living space, for installation in mobile housing and recreational vehicles, irrespective of the heating capacity or the type of burner used.
1.2…
Prints and printing inks — Assessment of light fastness
Is in technical conformity with CEI specification 02-59 of the European Comittee of the Paint and Printing Ink Manufacturers' Associations, and is in agreement with the ISO Recommendations and International Standards on light fastness tests for textiles. Applies to print substrates such as paper, board, metal and plastics, and to all printing processes such as letterpress, litho and gravure…
Paints and varnishes — Notes for guidance on the conduct of natural weathering tests
Specifies the factors which need to be taken into consideration in the selection of methods for the exposure to natural weathering of paint films or systems for the purpose of evaluating their durability. A method is specified which is recommended for the use where no specialized requirements apply. Supplementary information shall be derived from the national standard or shall be the subject of…
1. SCOPE
1.1 This Standard applies to complete, flue-connected, oil-fired warm air
appliances, irrespective of the heating capacity or the type of burner used.
1.2 The requirements given herein apply to appliances intended for
installation with the appliance base placed upon the floor, except as provided
for in Clause 1.4; and intended to be used with pipes or ducts for the…
