Rechercher

1. Scope 1.1 This standard applies to nailles, flat nonmetallic strapping, associated connectors and connections, intended for use in securing and reinforcing packages, bundles and containers.

1. Scope 1.1 This Standard applies to line-voltage wall thermostats, as defined in Clause 2.1, rated 300 V and less, complying with the requirements of CSA Standard C22.2 No. 24, Temperature- Indicating and -Regulating Equipment, and intended to be used for direct switching of a controlled resistive heating load. 1.2 This Standard covers definitions, performance requirements, marking…

1. SCOPE 1.1 This standard applies to 3-strand cotton rope treated for water and rot resistance.

Scope 1.1 This standard applies to a filled, one-part, hot-applied rubberized asphalt, suitable for application by squeegee, trowel or by other means as recommended by the manufacturer, for use in roofing and waterproofing. 1.2 For detailed information regarding intended uses of rubberized asphalt see par. 7.2.

1. SCOPE 1.1 This standard applies to 2/2 twill serge cloth made from 2-ply worsted yarns.

1. SCOPE 1.1 This standard applies to four types of erasers suitable for removing pencil writing, ink pen writing, ballpoint ink writing, typewriting, carbon copy and drawing cleaning.

1. Scope 1.1 This Standard applies to the measurement of the concentration of carbon monoxide in samples taken from ambient air, enclosed gas streams, and gases under pressure. 1.2 This Standard sets forth the following two applicable procedures for the measurement of the concentration of carbon monoxide: (a) Non-dispersive Infrared Spectrometry, which is intended for use where…

Establishes two-dimensional eyellipses representative of driver eye locations corresponding to the 90th, 95th, and 99th percentiles. The statistical representation of the driver's eye location contained in this Standard applies as a design tool to those road vehicles referred to in subclause 3.1.1 of ISO 3833. Some figures illustrate shapes and reference quantities of concern.

This standard applies to a method for determining the plastic viscosity and yield value of letterpress and lithographic inks by use of the Falling Rod Viscometer. Viscosity tables are provided for conversion of fall times to viscosity and yield values.

1. SCOPE 1.1 This standard applies to priming paint suitable for interior and exterior use on steel, aboard ships under conditions of marine atmosphere and intermittent immersion in salt water. 1.2 For additional information on intended uses, see par. 7.2.