Equipment for working soil — Tines and shovels for cultivators — Main fixing dimensions
Specifies the main fixing dimensions for interchangeable shovels designed to fit tines which conform to a type specified in this standard. applies to the lower portion of tines for fixing of various types of shovels having a working width of up to 400 mm. The following fixing types are specified: type 1 - one hole; - type 2 - two holes; type 3 - two holes, heavy type.
This standard applies to trimmed drawing sheet sizes intended for
the preparation of all types of technical drawings. Details of
other aspects of the preparation of technical drawings can be
found in Canadian Standards Association Standard B78.1 -
Mechanical Engineering Drawing Standards, Drafting Practices -
General Principles.
1. Scope
1.1 This Standard applies to equipment for installation and use in
accordance with the rules of the Canadian Electrical Code, Part I,
other than conduit couplings.
1.2 This Standard includes basic construction and inspection requirements
for the threaded entry for conduit into an electrical enclosure in
order to assure:
(a)…
1. SCOPE
1.1 This standard applies to vernier and dial type calipers and gages reading
to 0.02 mm, for precision measuring. Verniers and gages in accordance with
this standard shall be graduated with the International System of Measurement
(SI) Units.
1. Scope
1.1 This Standard applies to capacitor voltage transformers (CVT) intended to be connected between line and ground, comprising essentially a capacitor divider and an electromagnetic unit inter-connected as shown diagramatically in Figure 1. The capacitor voltage transformer may or may not have provision for power line carrier coupling.
1.2 This Standard in applicable parts…
Pants, Casual and Sport, Boys', Slim, Regular and Husky Ranges - Dimensions
Applies to the dimensions considered essential to provide fit of
short-rise slacks, such as western jeans, sport slims,
flare-bottom slacks, etc., in slim, regular and husky ranges,
that are intended for wear by boys (CSS sizes 7 to 20). This
dimensional standard does not apply to boys' very low-rise jeans
(Hipsters).
1. SCOPE
1.1 This standard applies to polystryrene loose fill thermal insulation for
use in building construction where the continuous use temperature at
the surface does not exceed 75°C.
1.2 Insulation material to this standard is suitable for pouring by hand or
for blowing through specially designed equipment.
1. Scope
1.1 This standard applied to screw type micrometer calipers for measuring
external and internal dimensions, thickness of tubing walls, and to
micrometer depth gages. Calipers and gages in accordance with this
standard shall be graduated with the International System of
Measurement (SI) Units.
