Rechercher

This standard applies to flat, translucent, rolled or cast glass having a pattern or figure on one or both surfaces, and used primarily in buildings for doors, windows, interior and exterior walls and for decorative purposes.

Scope 1.1 This standard describes the recommended procedures to be employed in applying 37-GP-54M flexible polyvinyl chloride membrane for roofing on new construction and for reroofing. 1.2 Three methods of membrane installation are covered by this standard, namely, loose laid, fully adhered and mechanically fixed. 1.3 Wind uplift requirements must be established inthe job…

1. Scope 1.1 This Standard provides requirements for the designs, manufacture and quality control of concrete poles for such uses as transmission, traction and distribution line supports, telegraph and telephone line and telecommunication cable supports and flood and street lighting poles. 1.2 The requirements of this Standard may be applied to both spun and cast poles and to both…

1. Scope 1.1 This Standard applies to the construction and performance of automatically operated damper devices (herein referred to as devices) intended for installation in flue pipes serving automatically operated oil-fired appliances. Note: Also included are two Appendices concerned with the retrofitting of these devices to existing appliance installations. 1.2 This Standard…

1. Application and Scope 1.1 Application This Standard applies to devices that automatically reduce the initial supply pressure to a set lower pressure in domestic water systems. It applies to devices in the size range 1/2 - 2 inches inclusive that are of the direct acting diaphragm type with a means for adjusting the pressure setting, and are suitable for use over a hydrostatic inlet…

1.1 Scope 1.1.1 This standard applies to newly produced automatic gas ignition systems (see Part III, Definitions) and components thereof other than types utilizing low, extra low, or high voltages, constructed entirely of new, unused parts and materials. An automatic gas ignition system shall perform the following functions: (a) Ignite the gas at the main burner(s), (b) Prove the…

1. SCOPE 1.1 This standard applies to inorganic zinc coating for use on steel superstructures, decks and hulls of vessels, bridges, towers, off-shore drilling rigs, tank linings and reconditioned equipment. 1.2 For detailed information on the intended uses of this coating see par. 8.2.

Applies to the materials, design, color and construction requirements of the National Flag of Canada.

This Standard applies to two types of gasoline to which no lead or phosphorus have been added and are therefore suitable for use under all climatic conditions in spark ignition engines equipped with emission control systems requiring the use of unleaded gasoline. In the interest of conservation of petroleum products it is essential that engine manufacturers continue to design engines to…

1. SCOPE 1.1 This standard applies to the dimensions considered essential to provide fit of sport shirts made from woven or tricot knit fabrics, intended for wear by boys.