Air-conditioning and ventilation of machinery control-rooms on board ships — Design conditions and b...
Applies to seagoing merchant ships for all conditions except those encountered in extremely cold or hot climates. Applicable parts of this Standard can be used for similar spaces. The annex provides guidance and details of good practice in the design of ventilation and air-conditioning systems for machinery control rooms.
Textile Text Methods Textile Fabrics - Measurement of Width of Pieces
This method specifies two procedures for determining the width of
pieces (of any length) of fabrics that are in the state of
relaxation obtained by exposure (free from applied tension) to
the Standard Atmosphere.
1. Scope
1.1 This Standard applies to structures and hoists that are not a permanent part of buildings, structures, or other works, and that are used during construction, alteration, or demolition to raise and lower persons and/or materials connected with or related to a building project.
1.2 This Standard covers the design, construction, installation, operation, and acceptance…
1. Scope
1.1
This Standard applies to fuseholder assemblies, rejectors for Type C fuses,
adapters for Type S fuses, and the current-carrying parts pertaining thereto
and mounted on bases of suitable insulating material, designed to be employed
in accordance with the Canadian Electrical Code, Part I.
1.2
Fuseholder assemblies covered by this Standard are intended to accept only the
following…
1. Scope
1.1 This Standard applies to structures and hoists that are not a permanent part of buildings, structures, or other works and that are used during construction, alteration, or demolition to raise and lower materials connected with or related to a building project.
1.2 This Standard covers the design, construction, installation, operation, and acceptance inspection and testing…
Certification of Companies for Fusion Welding of Aluminum
1. Scope
1.1 This Standard specifies requirements for certification of companies engaged in fusion welding of aluminum performed as part of the fabrication or erection of aluminum structures.
1.2 Requirements necessary to obtain and maintain certification include the qualification of welding procedures, the qualification of personnel, and an assessment of welding and auxiliary e…
Applies to new voltage transformers for use with electrical
measuring instruments and electrical protective devices at
frequencies from 15 Hz to 100 Hz.
The general requirements apply to all voltage transformers, but,
for certain types, e.g. capacitor voltage transformers, the
requirements are subject to the modifications stated in the
appropriate chapter. Although the requirements relate…
Medical electrical equipment. Part 2: Particular requirements for the safety of gamma beam therapy e...
Specifies requirements for the safety, design and construction of
gamma beam equipments when used for radiotherapy in human medical
practice.
Applies to equipment which is intended to deliver a gamma radiation
beam(s) at normal treatment distances greater than 5 cm using a
sealed radioactive source(s).
It is the purpose of the requirements contained in this standard to
ensure that the proposed…
1.1
This standard applies to cloth type, water-resistant, pressure-sensitive
adhesive tape intended primarily for packaging and sealing application where
high strength and low moisture vapour transmission are required.
1.2
For more detailed information on intended uses and application see par. 7.2.
