Rechercher

1. Scope 1.1 This Standard applies to insulated conductors intended for internal wiring in electrical equipment, but not as circuit conductors for use in raceways except where permitted by the Canadian Electrical Code, Part I. 1.2* Constructions covered by this Standard are (a) single-conductor, thermoplastic-insulated (Clause 5): (i) Type TXF, 60

This National Standard of Canada is identical in content and in layout with International Standard ISO 8402-l986, Quality - Vocabulary. It defines the basic and fundamental terms relating to quality concepts, as they apply to products and services, for the preparation and use of quality standards and for mutual understanding in international communications.

Applies, when required by the relevant product standard, to switchgear and controlgear hereinafter referred to as 'equipment' and intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c. It states those general rules and requirements which are common to low-voltage equipment as defined in Subclause 1.1, including for example:…

1. Scope 1.1 This Standard applies to locking type plugs, receptacles, equipment power inlets and outlets, and connectors rated up to 60 A and up to 600 V ac or 250 V dc, for use in accordance with the Canadian Electrical Code, Part I. 1.2 The devices covered by this Standard are intended for use with copper conductors only in making readily detachable electrical connections utilizing a…

1. Scope 1.1 This Standard applies to plugs, receptacles, power inlets and outlets, connectors, and similar wiring devices intended for use in electronic and electrical applications as follows (see Figure 1): (a) Type 0 rated up to 8.3 A and up to 30 V rms (42 V peak); (b) Type 1A rated up to 8.3 A and from 30 V to 600 V ac or dc, or both; (c) Type 1B rated from 8.3 A up to 200 A and up…

This standard applies to unbleached kraft sulphate paper or other equivalent materials that meet the requirements of this standard. In sheet form, it is intended for use in wrapping by hand; in roll form, for hand or mechanical wrapping.

Applies to the interconnection and systems requirements for the control of automatic slide projectors with built-in triacs and low-voltage projector lamps supplied via insulating transformers. Ensures, for correct system function, that in particular the connection of projectors to dissolve control units meets agreed interconnection standards.

Applies to multichannel analysers (MCA) operating as multichannel scalers (MCS). This standard presents specific terms relating to the main characteristics and establishes test methods for these characteristics.

Applies to ferroalloys given in the relevant International Standards. Should be read in conjunction with ISO 3713, ISO 7087 and ISO 7373. Includes four annexes.

Applies to Factory-Built Chimney Connectors which do not require field fabrication. They are for use with gas, liquid and solid fuel-fired residential appliances and building heating equipment where the flue-gas temperatures do not normally exceed 650 degrees C. They are intended for use inside buildings to form a connection to a factory-built chimney suitable for use with solid fuel, or…