Rechercher

This standard applies to index cards for general office use.

1. Scope 1.1 This standard applies to a low odour interior flat alkyd finish suitable as a topcoat on properly prepared plaster, plasterboard and wallboard. 1.2 For more detailed information on intended uses see par. 7.2. 1.3 This standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to…

This standard applies to brass or brass plated, roundhead, prong type paper fasteners and washers, used to hold sheets of paper together, and for use with file folders.

1. Scope 1.1 This standard applies to latex type primer-sealer for use on interior wall surfaces including plasterboard, dry plaster, concrete or previously painted porous surfaces. 1.2 For more detailed information on intended uses see par. 7.2. 1.3 This standard may require the use of materials and/or equipment that could be hazardous. This…

1. Scope and Objective 1.1 This Standard applies to wet-process porcelain and toughened glass suspension-type insulators used on ac overhead power lines with a nominal voltage greater than 1000 V and a frequency not greater than 100 Hz. This Standard applies to single insulator units only. This Standard does not apply to long rod insulators. 1.2 The objective of this Standard is…

1. Scope 1.1 This Standard applies to Christmas tree and other decorative lighting outfits, intended for connection to circuits of 125 V or less between conductors by means of an attachment plug cap, and designed to be used in accordance with the rules of the Canadian Electrical Code, Part I. 1.2 This Standard applies to indoor or outdoor outfits for illuminating Christmas trees and…

1.1 This standard applies to two types of vapour barrier jacket and facing material comprised of aluminum foil, glass fibre scrim and paper laminated with adhesive, for use in the temperature range of -20 to 65 degrees C over thermal insulation for pipes, ducts and equipment. 1.2 For more detailed information on intended uses, see par. 8.2.

1. SCOPE 1.1 This standard applies to a mechanical roll felt, sheet felt, and apparel and decorative roll felt. This felt is not intended for use in ammunition components. 1.2 For further details on intended uses, see par. 8.2. 1.3 This standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects…

Gives guidance on the position of measuring points to be used in the measurement of buildings and building products. The positions given apply for check and compliance measurement and for collecting accuracy data. Building products consisting of glass wool and similar soft materials are not the subject of this Standard.

Defines the syntax and semantics of the Formal Description Technique LOTOS used for the formal description of distributed, concurrent information processing systems. LOTOS can be used to describe formally the service definitions and protocol specifications of the layers of Open Systems Interconnection (OSI) architecture described in ISO 7498, and related standards, and conformance tests for…