Evaluation of surface contamination — Part 1: Beta-emitters (maximum beta energy greater than 0,15 M...
Applies to surfaces of equipment and facilities, containers of radioactive materials and sealed sources, does not apply to the skin and contamination of clothing. Gives direct and indirect methods of measurement (the latter by means of smear tests). Is restricted to beta- and alpha-emitters, the production rate of which, with regard to beta-particles plus monoenergetic electrons and alpha-…
Evaluation of surface contamination — Part 2: Tritium surface contamination
Applies to surfaces of equipment and facilities, containers of radioactive materials and sealed sources, does not apply to the skin and contamination of clothing. Gives a method of direct measurement and an indirect method for removable surface contamination. Evaluation of surface contaminations from beta-emitters (maximum beta energy greater than 0,15 MeV) and alpha-emitters is dealt with in ISO…
This National Standard of Canada is equivalent to International Standard ISO 8179-1985.
1. Scope and Field of Application
1.1 This Standard deals with the external coating of ductile iron pipe at the factory by zinc-coating.
1.2 This Standard includes specifications for the zinc-coating, application requirements, and coating inspection. Also included are requirements for the…
1. Scope
1.1 Types
This Standard covers three types of asphalt-impregnated and -coated glass-roll roofing surfaced with insoluble inorganic mineral matter:
(a) Types I and II: asphalt-impregnated and -coated glass-fibre felt surfaced with water-insoluble inorganic mineral matter;
(b) Type III: asphalt-impregnated and -coated glass-fibre felt surfaced with fine mineral matter on the…
1. Scope
1.1 This Standard applies to solid-state lighting controls rated at 600 V and less, with or without an integral switching (disconnecting) device, designed to be used in circuits
(a) for the control of incandescent lamps; and
(b) for the control of fluorescent, HID, ballasted, and similar lamps intended for installation in accordance with the Rules of the Canadian Electrical Code,…
1. Scope
1.1 This Standard applies to switching and metering centres (hereafter may be referred to for convenience as metering centres or centres) rated 600 V and less, intended to be used in accordance with the Rules of the Canadian Electrical Code, Part I, in nonhazardous locations, to provide switching, overcurrent protection and metering for a number of circuits supplied from a consumer…
Vertical building elements — Impact resistance tests — Impact bodies and general test procedures
Defines the conventional impact bodies used in order to reproduce the effect of actual impacts on vertical building elements as well as the general test procedures and the test procedures specific to each type of building element tested being given in the standards specific to these building elements. Applies to all vertical building elements excluding doorsets.
Pre-recorded capacitance grooveless videodisc system 60 Hz/525 lines - NTSC, on type VHD.
Applies to pre-recorded capacitance grooveless videodiscs for the 60 Hz/525 lines - NTSC compatible system and gives dimensional and other characteristics necessary to ensure interchangeability of the videodisc. Serves as a reference for manufacturers intending to make discs or players compatible with the system described in the standard.
See IEC 1106.
Electronic equipment used on rail vehicles. Part 2: Standardization of certain mechanical and electr...
Applies to all electronic control and regulation equipment, etc., with the exception of electronic power-circuits which conform to IEC 411 and IEC 411-1.
1.1
This standard applies to liquefied petroleum gas (LPG) consisting essentially
of butane and/or butylenes.
1.2
The liquefied petroleum gas is intended for use in gas burning equipment in the
generation of heat for domestic and industrial purposes where a low volatility
liquefied petroleum gas is required.
