Rechercher

1. Scope 1.1 This Standard applies to microwave ovens capable of generating less than 5 kW of microwave power and manufactured for use in homes and similar locations. 1.2 This Standard specifies methods of testing the energy consumption of electrically operated microwave ovens under specific test conditions. 1.3 This Standard applies to microwave ovens intended to operate through the…

1. SCOPE 1.1 This standard applies to rubber hose, with braided, knitted or spiral wound reinforcement, suitable for conveying water. 1.2 This standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate…

1. SCOPE 1.1 This standard applies to reinforced hose, intended for use in heavy-duty air line service and for conveying gases used in welding. 1.2 This standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the…

Applies to assemblies used for ambient and directional dose equivalents for beta radiation up to 4 MeV as recommended by the ICRU Report. Specifies the functions and performance characteristics of measuring assemblies and the test methods to be used for verifying compliance with the standard. It is divided into two sections: Section One - Principles of dose equivalent (rate) measurement. Section…

Applies to the dimensions considered essential for the construction of model forms used to assess fit of garments for wear by girls (Canada Standard Sizes Girls' Regular Range Sizes 3, 4, 6 and 10) and boys (Canada Standard Sizes Boys' Regular Range Sizes 3, 4, 6 and 10). Dimensions of three types of forms (Types A, B and C) are provided.

1.1 This standard applies to reinforced liquid asphaltic materials in the form of aqueous emulsions of the mineral colloid type for use as sprayed, trowelled or brushed-on coatings for built-up roofs and other roof surfaces, and for waterproofing concrete or masonry surfaces. 1.2 For more detailed information on intended uses and methods of application see par. 7.2 and 7.3.

1.1 This standard applies to sliding doors that are primarily intended to be installed in exterior walls of buildings. 1.2 Power assisted, industrial grade, and garage doors were not considered in the preparation of this standard.

Applies to seamless steel tubes with circular section of non-alloy quality steel. These tubes are provided for general pressure purposes including transporting of pressurized fluids. There are standards and rules permitting the use of these tubes up to a temperature of 350 0C (see annex A). The terms "tube" and "pipe" are synonymous terms. For general technical delivery…

For the purpose of this standard, which constitutes the technically revised second edition, the definitions in ISO 2569 apply. Sampling shall be made according to ISO 4707. Designation consists of the words "cylindrical cork stoppers" followed by the figures which correspond to their length and diameter, in millimetres, separated by a cross.

1. Scope 1.1 This Standard is concerned with the performance, durability, and safety of packaged seasonal solar domestic hot water (SSDHW) systems designed to provide hot water for small residential buildings. In these systems freeze protection is accomplished manually, with or without a device intended to offer limited freeze protection. It is intended to cover systems that provide all or…