Rechercher

1.1 This Standard specifies the requirements for stay in place, modular expanded polystyrene (EPS) Insulating Concrete Form (ICF) units. Once filled with concrete, the ICF units remain in place as the thermal insulation for the resulting cast-in-place concrete wall of uniform cross-section and thickness. 1.2 The requirements of this Standard apply to ICFs that act as permanent formwork for…

IEC 62947-1:2022 specifies test methods to measure the performance of electrically operated spray seats for household and similar use. This document applies to spray seats, including tank-type spray seats, instantaneous-type spray seats and combination-type spray seats. This document does not apply to the electrically operated spray seats that are intended for medical and/or assistive functions…

IEC 62841-4-6:2022 EXV contains both the international standard and its extended version (EXV). This extended version of the official IEC Standard is available in English only and provides the user with a comprehensive content of the Standard. IEC 62841-4-6:2022 EXV includes the content of the references made to IEC 62841-1:2014. IEC 62841-1:2014, Clause 1 is applicable, except as follows:…

This document specifies requirements for static, impact, and repetitive load strengths for postural support devices (PSDs) with associated attachment hardware intended for use with an undefined wheelchair seating system. It specifies the test methods for determining whether the minimum performance requirements have been met to release a product into use. It also specifies requirements for…

This document gives means for ensuring that samples of natural gas and natural gas substitutes that are conveyed into transmission and distribution grids are representative of the mass to which they are allocated. NOTE      To ensure that a particular gas is taken into account in the standard, please see Annex A. This document is applicable for sampling at sites and locations where…

1 Scope 1.1 General This Standard applies to a) fenestration systems covered by AAMA/WDMA/CSA 101/I.S.2/A440, including i) vertically sliding windows; ii) horizontally sliding windows; iii) dual-action windows; iv) casement windows, both fixed and operable; v) projecting (awning/hopper) windows; vi) fixed windows; vii) sidelites; viii) transom windows; ix) sliding doors; x…

1.1 This method describes a procedure for determining the filter plugging tendency of diesel fuels at low temperature, usually due to the formation of wax crystals (see note in 6.1). 1.2 The method applies to all distillate diesel fuels. Fuels are expected to provide satisfactory fuel flow in automotive equipment at temperatures equal to or higher than the minimum pass temperature as described…

This document specifies requirements for the qualification and certification of personnel who perform industrial non-destructive testing (NDT) in the following methods. a) acoustic emission testing; b) eddy current testing; c) leak testing (hydraulic pressure tests excluded); d) magnetic testing; e) penetrant testing; f) radiographic testing; g) strain gauge testing; h) thermographic…

1 Scope 1.1 This Standard applies to free-standing poles of ferrous metal, aluminum, polymeric, concrete, fibre- reinforced structures, and wood, and to their accessories, for use in the support of lighting equipment having ratings of 600 V and less, and intended to be installed in the commercial and industrial nonhazardous locations in accordance with the Rules of the Canadian Electrical Code…

1 Scope 1.1 This Standard applies to low-voltage fuses rated 1000 V or less, AC and/or DC, with interrupting ratings up to 300 kA (200 kA for Mexico). These fuses are intended to be used in accordance with the Canadian Electrical Code, Part I, CSA C22.1, NOM – 001, Mexican Electrical Code, and the National Electrical Code, NFPA 70. 1.2 This Standard and its subsequent Parts establish the…