Rechercher

1 Scope 1.1 This Standard specifies dimensional and safety requirements for recreational vehicles. Its purpose is to specify minimum criteria for providing a degree of protection against loss of life from fire and explosion. 1.2 The CSA Z240 RV Series of Standards does not apply to park model trailers. Note: Park model trailers are covered by the CAN/CSA-Z241 Series of Standards. 1.3 The…

1 Scope 1.1 General This Standard establishes criteria for emergency preparedness and response for the petroleum and natural gas industry systems. Note: Prevention, continuity, and recovery are addressed in other standards. 1.2 Applicability This Standard applies to petroleum and natural gas industry systems (see Figures 1and 2), including a) pipeline systems handling i) oil; ii) gas…

1 Scope 1.1 Purpose The purpose of this Standard is to provide criteria for the safe erection, use, and inspection of access scaffold (as covered in CSA S269.2 and engineered systems) and for the training of erectors and users of such equipment. 1.2 Subjects addressed This Standard applies to the erection, use, and inspection of access scaffold, and to training requirements for access…

Scope This National Standard specifies minimum requirements for preparing, developing, and conducting challenge-based, agile and open procurement of digital products and services. This Standard defines a framework for organizations evaluating the suitability of digital product and service providers using “challenge-based” criteria. This methodology requires organizations sourcing digital,…

1 Scope 1.1 General This Standard addresses the following aspects of cementitious materials: a) their definitions; b) their chemical, physical, and uniformity requirements; c) the tests required; d) the procedures for inspection and sampling; and e) the units of measurement, packaging, marking, and storage. 1.2 Classifications The cementitious materials for use in concrete are…

This document specifies an acceptance sampling system of single sampling plans for inspection by variables, primarily designed for use under the following conditions: a)       where the inspection procedure is applied to an isolated lot of discrete products all supplied by one producer using one production process; b)       where only a single quality characteristic, x, of this process is taken…

IEC 60079-17:2023 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 60079-17:2023 applies to users and covers only those factors directly related to the inspection and maintenance…

ISO 14044 requires the goal and scope of an LCA to be clearly defined and be consistent with the intended application. Due to the iterative nature of LCA, it is possible that the LCA scope needs to be refined during the study. This document specifies methodologies that can be applied to determine the carbon footprint of a product (CFP) or partial CFP of a hydrogen product in line with ISO 14067.…

Scope 1.1 This Standard sets forth the minimum requirements for containment sumps, and associated sump fittings and accessories (products) intended for below-grade, or at-grade, or above-grade use as an enclosure for the housing of, and access to, underground piping, connector piping, and other fueling system components (such as pumps, valves, sensors, wiring, etc.), in addition to temporary…

Scope 1.1 This Standard covers requirements for corrosion control additives for fire sprinkler systems, such as corrosion inhibitors. 1.2 These solutions are intended for use in wet pipe sprinkler systems for installation in accordance with the manufacturer's design and installation instructions and the following standards: a) Standard for the Installation of Sprinkler Systems in One-…