Rechercher

Scope This method provides a means of determining the degree of corrosiveness of gasoline and middle distillate fuels to silver or silver alloys used in fuel system components. This method also applies to oxygenated gasoline and diesel blends, intermediate streams or blending components such as alkylate, reformate, and isomerate. Units of measure — Quantities and dimensions in this standard…

Scope This method evaluates the cold soak filter blocking tendency (CSFBT) of biodiesel (B100). Minor components of some biodiesel esters, including saturated monoglycerides, can separate above the cloud point of a biodiesel fuel blend. The CSFBT test quantifies the propensity of components to separate from a blend of biodiesel and isoparaffinic solvent after a cold soak cycle. The testing…

Objet La présente méthode évalue la tendance au colmatage des filtres après trempage à froid (TCFTF) du biodiesel (B100). Des constituants mineurs de certains esters de biodiesel, dont les monoglycérides saturés, peuvent se séparer à une température supérieure au point de trouble d’un mélange de carburant contenant du biodiesel. L’essai de la TCFTF quantifie la tendance de ces constituants à…

Scope This standard defines minimum requirements for the use of biometrics.

Scope This National Standard of Canada applies to two types of petroleum distillates intended for use in applications as described below. b) used in well-ventilated surroundings, and in wick-fed illuminating lamps. a) Type No. 1-K Kerosene is intended for use in unvented space heaters as described in CSA B140.9.3, when Type No. 2-K Kerosene is intended for use in flue-connected stoves and…

Objet La présente Norme nationale du Canada s’applique à deux types de distillats de pétrole destinés aux applications décrites ci-dessous : lorsqu’ils sont employés dans un milieu bien aéré. Il est également destiné aux lampes à mèche. b) a) Le kérosène de type n° 1-K est destiné aux radiateurs sans ventilation décrits dans la norme CSA B140.9.3, Le kérosène de type n° 2-K est destiné aux…

This document describes the background to methods for the determination of the thermal conductivity and thermal diffusivity of polymeric materials. Different techniques are available for these measurements and some can be better suited than others for a particular type, state and form of material. This document provides a broad overview of these techniques. Standards specific to these techniques…

This document specifies a method for determining the ability of a test piece bonded with a thermoplastic adhesive, to support a given load for a specified time without fracture or excessive distortion, and specifies performance requirements for mean survival time. It should be used in conjunction with ISO 19209 and ISO 19210, which describe durability classes and corresponding test methods for…

1 Scope 1.1 Overview This Standard covers enamelled cast iron and enamelled steel plumbing fixtures, and specifies requirements for materials, construction, performance, testing, and markings. 1.2 Inclusions This Standard covers the following plumbing fixtures: a) bathtubs; b) drinking fountains and water coolers; c) lavatories; d) shower bases; and e) sinks: i) bar sinks; ii)…

Scope 1.1 Scope of the B1800 compendium This Compendium specifies requirements for compounds and for manufactured pipe and pipe fittings, the relevant test methods, and marking requirements, and applies to thermoplastic nonpressure piping including a) drain, waste, and vent pipe and pipe fittings; b) sewer and storm pipe and pipe fittings; and c) accessories such as factory-assembled…