Plastics — Guidance on fire characteristics and fire performance of PVC materials used in building a...
This document provides information on the fire characteristics and performance in fire tests of PVC materials and products for use in building applications.
It illustrates a number of suitable applications incorporating primarily PVC materials, including unplasticized PVC (PVC-U), plasticized (or flexible) PVC (PVC-P) and chlorinated PVC (PVC-C) based products. Except where otherwise stated,…
Household and similar electrical appliances — Safety — Part 2-31: Particular requirements for range ...
This Standard applies to the safety of such equipment that is designed and constructed for installation
and use in accordance with CSA C22.1, Canadian Electrical Code, Part I.
Cette norme s’applique à la sécurité du matériel conçu et fabriqué pour être installé et utilisé
conformément à CSA C22.1, Code canadien de l’électricité, Première partie.
Thermal-links — Requirements and application guide / Protecteurs thermiques — Exigences et guide d...
This International Standard is applicable to thermal-links intended for incorporation in
electrical appliances, electronic equipment and component parts thereof, normally intended
for use indoors, in order to protect them against excessive temperatures under abnormal
conditions.
NOTE 1 The equipment is not designed to generate heat.
NOTE 2 The effectiveness of the protection against…
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety ...
1 Scope
This clause of Part 1 is applicable, except as follows:
Addition:
This part of IEC 62841 applies to transportable drain cleaners.
NOTE 101 Drain cleaners are also known as pipe cleaners.
This standard does not apply to hand-held drain cleaners.
NOTE 102 Hand-held drain cleaners are covered by IEC 62841-2-21.
This standard does not apply to high pressure cleaners to clean drains.…
Explosive atmospheres — Part 13: Equipment protection by pressurized room “p” and artificially venti...
This part of IEC 60079 gives requirements for the design, construction, assessment,
verification and marking of rooms used to protect internal equipment:
– located in a Zone 1 or Zone 2 or Zone 21 or Zone 22 explosive atmosphere (an area
normally requiring an equipment protection level (EPL) Gb, Gc, Db or Dc) without an
internal source of gas/vapour release and protected by pressurization…
Gas hose connectors for portable outdoor gas-fired appliances
1 Scope
1.1
This Standard applies to gas hose connectors (See Clause 3 Definitions), hereinafter referred to as connectors. They are conduits for conveying gas and depend for gas-tightness on the wall structure of the hose material. Such connectors are:
a)
newly produced and constructed entirely of new, unused parts and materials; and
b)
equipped with a fitting at each end provided with…
1 Scope
1.1
This Standard provides criteria and requirements for the design of a durable building and its building elements and includes provisions for cost analysis and management and for a quality management program for the design, construction, operation, maintenance, repair, and renovation of a building and its building elements.
1.2
This Standard applies to the building and to building…
Standard for Pre-Engineered Dry and Wet Chemical Extinguishing System
1 Scope
1.1 These requirements cover the construction and operation of fixed pre-engineered dry chemical fire extinguishing system units and fixed automatic extinguisher units intended to be used in accordance with the Standard for Dry Chemical Extinguishing Systems, NFPA 17 and with the National Fire Code of Canada, asapplicable; and; fixedpre-engineered wet chemical fireextinguishing system…
Systèmes d'extinction d'incendie à poudres chimiques précalculés
1 Domaine d’application
1.1 Les présentes exigences s’appliquent à la construction et à l’utilisation des unités de système d’extinction àpoudrefixesstandardisées etdesunités desystèmed’extinction automatiquefixesconçues pour être utilisées en conformité avec la norme NFPA 17, Standard for Dry Chemical Extinguishing Systems, et avec le Code national de prévention des incendies du Canada, selon…
1 Scope
1.1
This Standard covers controlled outlets, equipped with or without locking or non-locking receptacle configurations, for permanently connected branch circuit installation, rated up to and including 600 V, 60A and intended to be installed in ordinary locations in accordance with CSA C22.1, Canadian Electrical Code, Part I.
1.2
This Standard also covers outlets that might be…