Rechercher

This document specifies methods of test for cemented or wrapped joints for buried and above ground glass-reinforced thermosetting plastics (GRP) piping systems. This document is only applicable to the joint and covers methods of test to prove its design. It assumes that the joint either is or is not intended to be subject to the effects of hydrostatic end thrust. The tests detailed in 9.2, 9.4 to…

1 Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replacement: Replace the text, except the first paragraph, with the following new text: This part of IEC 61010 applies to equipment intended for in vitro diagnostic (IVD) medical purposes, including self-test IVD medical purposes. IVD medical equipment, whether used alone or in…

1 Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replacement: Replace the text, except the first paragraph, with the following new text: This part of IEC 61010 is applicable to electrically operated laboratory equipment and its accessories for mechanical mixing and stirring, where mechanical energy influences the shape or size or…

1 Scope 1.1 This Standard covers the material properties and the manufacturing requirements of fibre-reinforced polymer (FRP) bars or bars that are part of a grid for use in non-prestressed internal reinforcement of concrete components of structures (e.g., bridges, buildings, and marine structures). 1.2 This Standard covers FRPs that comprise a) E-CR glass, carbon, aramid, or basalt…

1 Scope This part of IEC 61400 deals with safety philosophy, quality assurance, and engineering integrity and specifies requirements for the safety of small wind turbines (SWTs) including design, installation, maintenance and operation under specified external conditions. Its purpose is to provide the appropriate level of protection against damage from hazards from these systems during…

1 Scope 1.1 This Standard provides uniform test methods for evaluating material compatibility in compressed hydrogen applications. The results of these tests are intended to provide a basis for comparison of materials performance in applications using compressed hydrogen. 1.2 This Standard applies to polymer materials only. Note: In this Standard, the term “polymer” refers to synthetic…

1.1 This Standard prescribes inspection and test procedures for the purpose of verifying that the fire alarm system is installed in conformance with the design and CAN/ULC-S524, Standard for Installation of Fire Alarm Systems, and performs all of its intended functions as designed. NOTE 1: This Standard is intended to apply to both required and voluntary fire alarm installations. NOTE 2:…

1.1 This Standard prescribes requirements for the inspection and testing of fire alarm systems; and specifies the devices and functions to be inspected, tested, and documented for the periodic inspection and test. NOTE 1: This Standard is intended to apply to both required and voluntary fire alarm installations. NOTE 2: Refer to Annex A (Informative), Informative Materials, A1.1.

This standard defines profiles that select features, options, configurations, defaults, protocols and procedures of bridges, stations, and LANs that are necessary to build networks that are capable of transporting fronthaul streams, which are time-sensitive. NOTE—Stream and flow are used as synonyms in this document.1

1.1 Ces exigences s’appliquent aux tuyaux et raccords thermoplastiques utilisés dans des systèmes d’extincteurs automatiques sous eau pour le service de protection contre les incendies. 1.2 Les tuyaux et raccords thermoplastiques visés par ces exigences sont destinés à une utilisation dans des systèmes de gicleurs pour les types d’usages suivants : a) usages à faible risque tels que définis…